TOYOTA

Please read full description before ordering.

**Estimated production lead time is 10-14 weeks**

 Call to get current lead times.

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

Note: 2010-13 Limited and SR5 models and 2014+ Limited editions will require trimming or removal of the lower rocker trim.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• Works on both Non-KDSS and KDSS vehicles.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

• Sold as a pair
• Click Here for Installation Instructions
• Weight: 115 lb

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

*NEW* This product ships ground and can be shipped to a residential address. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

New upgraded design!  

Note: Photo shows stainless steel. Product is now made using Aluminum. This product is laser cut aluminum comes unfinished, bare aluminum.

The new design allows you to mount a rocker switch next to the compressor and a manifold on the center bracket if you are running air lockers.

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Product ships in 5-7 days when in stock. Compressor sold separately.

Works only on 2010+ 4Runner (5th Gen) and works on 2020+ 4Runner's

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2010 - 2024  4Runner Washer bottle reservoir skid
***FREE SHIPPING***

• Designed and built in house to take a beating!
• Steel Construction
• Direct bolt in application 
• Protects stock washer bottle reservoir without modification 
• Works with all aftermarket bumper applications!
• Raw unfinished ready for paint

Free shipping to the lower 48 states.

2010+ 5th Gen 4Runner Cooler Line Skids

Adds protection to your exposed cooler lines.

Comes in a set of 2 (driver and passenger side)

Comes Raw aluminum, ready for paint

***Note: These are already included with the 5th Gen 4Runner aluminum front bumper

Built by skilled craftsmen in Colorado Springs, CO USA

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Winch Ready Option: 

Winch Access (Fairlead opening, side access holes, and light bar cut out)

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Available now for your 2014+ 4Runner SR5, Trail, or TRD Pro!

***Does not work on Limited or TRD Sport trim levels or 2010-2013 unless front end plastic and headlight is updated to newer 14+ year.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2014 and up 4Runner provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. If you don't want to run a winch initially but then change your mind later on, you can easily order just the aluminum shell rather than replacing the entire bumper. Our hoop is also a separate bolt on option as well. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.
• Aluminum outer shell for corrosion resistance and weight reduction
• Product Weight: 35lbs over stock (Total weight about 55 lbs)
• Ability to mount most popular 20" single row LED light bars.
• No hoop, low hoop or tall hoop options available. Tall hoop clears TSS sensor and sits just below the TOYOTA cross bar.
• Complete bolt on installation (cutting of the stock bumper required).
• No Powder Coating option available: Unfinished aluminum comes DA sanded and pre-prepped for powder coating or custom finish.
• NOTE: 2020 models with the TSS sensor in the grille can not use the optional Low Hoop but will work without it.
  
• Will work with or without a 1" body lift.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

***For NON-KDSS vehicles

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle.

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Designed slightly lower than stock to work with or without a differential drop without using spacers for lifted vehicles. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

High Clearance Front Bumper

**Estimated production lead time is 10-14 weeks**

 Call to get current lead times.

Designed here in house all out of top grade 3/8'' and 3/16'' steel with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

Weight - 130lbs 

**TSS option available**

Shown in photo but not included -

Winch - Zeon 10K Found HERE 

Baja Designs listing

- LP9 found HERE 

- Squadron SAE found HERE

-Squadron sports found HERE

- Baja Designs 30'' upper light bar found HERE 

- Baja Designs S2 

Winch, lighting and accessories not included in price 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2010+ 4Runner Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your 4Runner.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2010+ 4Runner Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. 2022, 2023

***For vehicles with KDSS***

 **Estimated production lead time is 8-12 weeks**

 Call to get current lead times. 

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

***TRD Pro factory skid plate may require modification to work with this bumper. Compatible with most aftermarket skid plates.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2016 and up Tacoma provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. Control box relocation bracket included 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.

• Aluminum outer shell for corrosion resistance and weight reduction

• Product Weight: 35lbs over stock (Total weight about 55 lbs)

• "No hoop" or "low hoop" options available. Low Hoop is welded on.

• Complete bolt on installation (cutting of the stock bumper required).

• See how our modular design works:

Note: The Tacoma hoop is weld on.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your FJ Cruiser. Similar in strength as our Steel Series bumpers at about 1/3rd the weight (45 lbs), it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the FJ Cruiser. 

• Made in 5052 H34 1/4" Aluminum from USA.

• Optional Low hoop design allows for 20" Single Row LED Light.

• Recessed light holes for fog light mounting.

• Complete bolt on installation. Slight trimming of inner finder liner required.

• Available in raw, unfinished aluminum or Powder Coated in Semi Gloss Black textured finish.

• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships truck freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details.

HeftyFab Installation Rating: 2 (trimming/bolt on)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 12-16 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 5th Gen 4Runner. See options above.

***2020 models require TSS relocation. Please select model year to include this kit. Kit includes mounting bracket, trim kit, and new OEM wiring harness. If you have a front camera, please also select the front camera relocation option.

NOTE: During Installation, DO NOT start vehicle with TSS Sensor unplugged! Starting the vehicle with the sensor unplugged will result in recalibration being required by Dealership

*** Limited models with front parking sensors. Parking sensors will not work with this bumper and will have to be deactivated on vehicle control center on the dash.

• Made from a combination of 5052 H34 1/4" Aluminum and 3/8, 3/4" 6061-T6 Aluminum. Frame mounts are 1/4" Steel
• Raw Product Weight: 59lbs
• Recessed lighting holes for aftermarket lights.
• No hoop, low hoop, or PreRunner hoop options available.
• Low hoop design allows for 30" Single Row LED Light.
• Complete bolt on installation (cutting of the stock bumper required).
• Available in raw, unfinished aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

INCLUDES:

• Aluminum Bumper
• Frame Mounts
• Cooler Line Guards
• Lower Panel
• All hardware/bolts necessary for installation
• Click Here for Installation Instructions
• Click Here for Installation Video

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2010+ 4Runner Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

HIGH CLEARANCE HYBRID TUBE FRONT BUMPER

**Estimated production lead time is 10-14 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance hybrid tube style bumper for your 2010+ 4Runner.
Designed here in house all out of top grade DOM steel tubing with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum Bumpers. Available for all models and years for the 4th Gen 4Runner.

Product Specifications

• Made in 5052 H34 1/4" Aluminum from USA.
• Recessed light holes for aftermarket fog lights (non-flush mount).
• Design allows for 20" LED light.
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished aluminum - 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA.

HeftyFab Installation Rating: 4 (drilling/cutting of bumper required)

Shipping and Pick Up

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

2016-2023 Tacoma

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

The Hefty Fabworks Body Mount Relocation kit is the ultimate solution for fitting larger tires on your 4Runner, Tacoma or GX. Unlike some other kits on the market, our relocation kit is designed to add strength to the frame and body mount while increasing the tire clearance. No more compromising the frame structure with poorly designed products, we provide a large frame plate that is welded into the frame and spreads the load across a large area, spanning across the original body mount areas and frame holes to eliminate frame cracking and structure issues associated with many relocations. 

Made in the USA!!

CNC laser cut and formed in house at Hefty Fabworks in Colorado Springs, CO

Kit includes: Drivers and Passenger side mounts, Two backer plates, Lower gusset plates, New Bushings and hardware to complete your install.

Installation:

Installation should be done by a professional and requires cutting, grinding and welding. The quality of the welding will determine the strength of the final product so pick your installer with this in mind. Average install time 5 hours.

Support the body of the vehicle with jacks or use a wedge between the body and frame to maintain the correct spacing. (don't forget to remove the wedge after the install is completed)

Pulling the interior floor carpet back, find the factory body mount bolt and remove the bolt from the vehicle. Remove the body mount.

Cut the factory body mount off the vehicle making sure not to cut into the frame, grind smooth.

Install the supplied frame plate: determine the location of the frame plate with the new body mount, start tacking the plate in at the rear portion. The plates are flat when they come to you, we recommend welding the section of the plate to the frame that sits flat, then while hot use a large hammer to for the plate to the frame towards the front of the vehicle and continue your weld as you go.

Install the body mount plate with the new hardware and tighten to compress the bushing. Tack weld the bracket into place then remove the bushing and hardware. Fully weld the mount into place, then weld in the lower brace. Wait for the brackets to cool then paint with a high quality paint before installing bushings.  

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The Hefty Fabworks 2nd Gen Tacoma Rock Sliders provide the ultimate protection and functionality. 100% bolt on and available for all platforms. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, using all American top quality steel. All sliders are assembled using a set jig to eliminate human error and to assure a perfect fit for every platform, every time. The integrated kick out and tread plate feature give your sliders not only the strength to take on the trail but the function of a convenient step.

• Features a mild bump out at the rear section.

• 100% Bolt-On installation to vehicle frame - no modification required.

• All hardware provided.

Product Specifications:

Material - 2" x 2" x .188" sq. tube | 1.75" x .120" round DOM tubing
Finish - This product ships bare metal and will need to be coated before install

• Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA
This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up or In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2011, 2012, 2013, 2014, 2015

Please read full description before ordering.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

New for the 4th gen 4Runner, The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

Trimming or removal of the lower rocker trim may be required.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Will have similar installation as 5th gen 4Runner:

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Introducing Hefty Fabworks Bed Stiffeners for the 3rd Gen Tacoma. These were designed with the intention of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

Requires Drilling

***Comes bare steel, will need coating prior to installation***

2005-2015 Toyota Tacoma Aluminum Winch Bumper

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes, you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9,500lbs with standard 10" x 4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 2nd Gen Tacoma. See options above.

• Made in 5052 H34 1/4" Aluminum from USA.

• Recessed lighting holes for 3.5-4" aftermarket lights

• Low hoop design allows for 30" Single Row LED Light.

• Complete bolt on installation w/ minimal cutting required.

• All raw, unfinished aluminum is DA sanded and comes pre-prepped for powder coat.

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone on transmission/transfer case skid and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

Includes:

-Radiator/Engine Skid Aluminum

-Transmission/Transfer Case Skid Aluminum

What makes these better than the competition?

The Hefty Fabworks 2007-2021 Toyota Tundra Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Tundra.

***NOTE: NOT compatible with 8 foot bed models.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components. Includes built-in oil drain ramp.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 102 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine and Transmission/Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments, an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Please read full description before ordering.

**Estimated production lead time is 4-8 weeks**

 Call to get current lead times.

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top-quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships ground and can be shipped to a residential address. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014