Hefty Fabworks

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum Bumpers. Available for all models and years for the 4th Gen 4Runner.

Product Specifications

• Made in 5052 H34 1/4" Aluminum from USA.
• Recessed light holes for aftermarket fog lights (non-flush mount).
• Design allows for 20" LED light.
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished aluminum - 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA.

HeftyFab Installation Rating: 4 (drilling/cutting of bumper required)

Shipping and Pick Up

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused! This bumper can handle the harshest off road abuse. Unlike other aftermarket bumpers that use thin 1/8" or thinner metal, this Hefty Fabworks bumper is built with strength in mind. Using the only highest grade A36 American Steel, the 3/16" main body, 3/8" mounting plates, sleeved and integrated recovery points make this the strongest bumper available for your 4Runner. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 4th Gen 4Runner.

• Made of A36 3/16" and 3/8" USA Steel.
• Recessed lighting holes for aftermarket lights (non-flush mount)
• Low hoop design allows for 30" Single Row LED Light.
• Available in Low Hoop or Full Guard (3 Hoop).
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished steel - DA sanded and prepped for powder coating

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call for options 
  
  
  
  

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change. 

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-10 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003 - 2009 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes: Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar.***

**Estimated production lead time is 8-10 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 4Runner Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your 4Runner.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003-2009 4Runner Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Please read full description before ordering.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

New for the 4th gen 4Runner, The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

Trimming or removal of the lower rocker trim may be required.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Will have similar installation as 5th gen 4Runner:

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Lexus. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum Bumpers. 

Product Specifications

• Made in 5052 H34 1/4" Aluminum from USA.
• Recessed light holes for aftermarket fog lights (non-flush mount).
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Weight: 59 lbs

Built by skilled craftsmen in Colorado Springs, CO USA.

HeftyFab Installation Rating: 4 (drilling/cutting of bumper required)

________________________________________

Shipping and Pick Up

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

***Will work on Non-KDSS GX470's ONLY***

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003 - 2009 Lexus GX470 Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Lexus.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Non-KDSS only

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes: Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Will work on Non-KDSS GX470's ONLY***

Please read full description before ordering.

**Estimated production lead time is 4-8 weeks**

 Call to get current lead times.

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

New for the Lexus GX470, The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

Trimming or removal of the lower rocker trim is required.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Will have a similar installation as 5th gen 4Runner:

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change. 

***Current photos showing 5th gen 4Runner but GX470 are similar.***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your GX70.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

***Will work on Non-KDSS GX470's ONLY***

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003-2009 Lexus GX470 Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but GX470 are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your GX470.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but GX470 are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your GX470.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

For Nissan Xterras with a 2" body lift. This bolt on panel fills the gap between the radiator skid plate and the front bumper associated with running a 2" body lift. In addition to the aesthetic appeal, this panel adds additional strength to the leading edge of the radiator skid. ***Will only work with the Hefty Fabworks Radiator skid plate, as this panel bolts directly onto it.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

***Bumper will feature new fog light housing design. OEM Fog lights will no longer work. You must run aftermarket LED fog lights. See the Tall Hoop Xterra bumper for photo example.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened and sleeved integrated recovery points make this a very strong and very light weight bumper (only 55 lbs) for your Xterra. Similar in strength to our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic line winches strongly suggested with our Aluminum series bumpers.

NOTE: Vehicle in photos shown with 2" BL Filler Panel

• Recessed light holes for aftermarket LED lights.
• Accommodates 20" Single Row LED Light Bar.
• Complete bolt on installation, minor trimming required.
• Available in raw, unfinished aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 
• Radiator skid plate optional, please add to order if needed. (Recommended)

DO YOU HAVE A 2" BODY LIFT? CLICK HERE FOR BODY FILL PANEL 

Built by skilled craftsmen in Colorado Springs, CO USA

THIS BUMPER SHIPS TRUCK FREIGHT ONLY to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (Bolt on/ minor trimming of inner fender liners required)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Free shipping to the lower 48 states.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

2005-2015 Nissan Xterra

These skid plates are made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling. This product does not include the Radiator skid. (Add on using the options above)

Besides giving you peace of mind, these skid plates will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

Weight:  lbs

Full set reduces the shipping cost of individual skids costs.

Part Numbers:

(Optional) Radiator: 220311

Engine: 220321

Transmission: 221331

Transfer Case: 213341

Gas Tank: 221351

Built by skilled craftsmen in Colorado Springs, CO USA

Orders to Hawaii, Alaska, or outside the continental United States please call for a shipping quote. Shipping rates will be adjusted prior to shipment.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

REAR BUMPER WITH SWING ARM

**Estimated production lead time is 10-12 weeks**

 Call to get current lead times.

Powder coating is available only for local pick-up and installations.

2005-2015 Xterra Rear Bumper

Hefty Fabworks is proud to offer our heavy duty rear bumper. Replace your thin stock bumper with a solid built replacement bumper. Built from 3/16" A36 American Steel and 1/4" mounting plates. All of our rear bumpers include 1" solid recovery points and built in receiver hitch. Compatible with most aftermarket ladders. Comes standard with license plate mount & light. Includes swing out tire carrier. Includes hi-lift mounting and all hardware for a simple install. Redesigned hinge and latch design for an incredibly strong and stout tire carrier. 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005-2015 Xterra Rear Bumper

Hefty Fabworks is proud to offer our heavy duty rear bumper. Replace your thin stock bumper with a solid built replacement bumper. Built from 3/16" A36 American Steel and 1/4" mounting plates. All of our rear bumpers include 1" solid recovery points and built in receiver hitch. Compatible with most aftermarket ladders. Comes standard with license plate mount & light and a CB antenna mount. Optional swing out tire carrier available. Includes hi-lift mounting and all hardware for a simple install.

Weight: No Swing Arm: 60lbs

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005-2015 Xterra sliders

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built to be abused over and over and leave your Xterra fully protected.

Standard Features:

• Full fender to fender coverage
• Integrated dimple died tread plate steps for easy vehicle entry
• 2 Tube supports
• 1 3/4" X .120 wall DOM outer rub rail
• 2x3 x 3/16" wall main structure
• 2 mounting points to the frame
• Bolt on ( drilling required (qty 2) 1/2" holes )

Body Lift option. Raises Sliders up 2". Must have a body lift installed to be able to install these sliders. ***NOTE: A suspension lift is different than a body lift. If you are only doing a suspension lift (changing the coilovers for example) then you do not need to select this option.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

All Rock Sliders ship freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (bolt-on//drilling/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005-2015 Nissan Xterra ONLY

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

*Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories.*

The T-Case skid plate will cover and protect the very vulnerable Transfer Case on your Xterra.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

Besides giving you peace of mind, this skid plate will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

Aluminum: 13 lbs

Steel: 30 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The engine skid plate will cover and protect the trucks low hanging aluminum front differential and the oil pan on the Xterra and Frontier. By design, it will provide easy access to drain the engine oil.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling.

The engine skid plate requires drilling four 3/8” holes – this is to make it stronger without relying on the weak M8 OEM holes. If the radiator skid plate was purchased – it will share two holes with that one.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 15 lbs

Steel: 32 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Introducing Hefty Fabworks Bed Stiffeners for the 2nd Gen Tacoma. These were designed with the intentions of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

**Requires Drilling**

2005-2015 Toyota Tacoma Aluminum Winch Bumper

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes, you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9,500lbs with standard 10" x 4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 2nd Gen Tacoma. See options above.

• Made in 5052 H34 1/4" Aluminum from USA.

• Recessed lighting holes for 3.5-4" aftermarket lights

• Low hoop design allows for 30" Single Row LED Light.

• Complete bolt on installation w/ minimal cutting required.

• All raw, unfinished aluminum is DA sanded and comes pre-prepped for powder coat.

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The Hefty Fabworks 2nd Gen Tacoma Rock Sliders provide the ultimate protection and functionality. 100% bolt on and available for all platforms. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, using all American top quality steel. All sliders are assembled using a set jig to eliminate human error and to assure a perfect fit for every platform, every time. The integrated kick out and tread plate feature give your sliders not only the strength to take on the trail but the function of a convenient step.

• Features a mild bump out at the rear section.

• 100% Bolt-On installation to vehicle frame - no modification required.

• All hardware provided.

Product Specifications:

Material - 2" x 2" x .188" sq. tube | 1.75" x .120" round DOM tubing
Finish - This product ships bare metal and will need to be coated before install

• Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA
This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up or In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2011, 2012, 2013, 2014, 2015

2005-2019 Nissan Frontier ONLY

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 MODELS***

The Transfer Case skid plate will cover and protect the very vulnerable transfer case on the Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

CCshort Aluminum: 18 lbs

CClong Aluminum: 23 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2005-2019 Nissan Xterra / Frontier

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 FRONTIER MODELS***

The Gas Tank skid plate will cover and protect the plastic gas tank on the Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation. This skid plate requires no drilling.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 19 lbs

Steel: 51 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.