Tacoma 2016 - 2023

 

***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

 

***Sliders will feature new Hefty Fabworks logo

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The Hefty Fabworks 3rd Gen Tacoma Rock Sliders provide the ultimate protection and functionality. 100% bolt on and available for all platforms. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, using all American top quality steel. All sliders are assembled using a set jig to eliminate human error and to assure a perfect fit for every platform, every time. The integrated kick out and tread plate feature give your sliders not only the strength to take on the trail but the function of a convenient step.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

•  

  • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

---

Product Specifications:

Material - 2" x 2" x .188" sq. tube | 1.75" x .120" round DOM
Length - SB: 81" | Access: 81"
Weight - 150lbs per-pair 
Finish - Raw Unfinished 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up or In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

***TRD Pro factory skid plate may require modification to work with this bumper. Compatible with most aftermarket skid plates.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2016 and up Tacoma provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. Control box relocation bracket included 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.

• Aluminum outer shell for corrosion resistance and weight reduction

• Product Weight: 35lbs over stock (Total weight about 55 lbs)

• "No hoop" or "low hoop" options available. Low Hoop is welded on.

• Complete bolt on installation (cutting of the stock bumper required).

• See how our modular design works:

Note: The Tacoma hoop is weld on.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

2016-2023 Tacoma

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Introducing Hefty Fabworks Bed Stiffeners for the 3rd Gen Tacoma. These were designed with the intentions of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

**Requires Drilling**

HIGH CLEARANCE HYBRID FRONT BUMPER

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance hybrid bumper for your 2016 - 2023 Tacoma.
Designed here in house all out of top grade DOM steel tubing with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016-2022 Tacoma

2005-2023 Toyota Tacoma Rock Sliders

Introducing our Steel Rock Sliders for 2nd & 3rd gen Toyota Tacoma. These fit 2005 - 2023 Double Cab Short Bed and the Access Cab Long bed models in both 4WD and 2WD. These sliders give you superior rocker panel protection while also giving you the functionality of a step. At 0 degrees, these sliders still tuck up close to the body of your truck, giving you great ground clearance and peace of mind. The kickout (flared end of the slider) allows the rear of your vehicle to act as a pivot point, pushing the rear tire away from a rock or tree. Plus, it can be used as a wide step for accessing gear on top of your truck. Lastly, DOM tubing is some of the strongest steel material available, commonly used on high end sliders. These sliders can easily hold the weight of the entire vehicle and will give you ultimate protection on the trail.

Why Backwoods vs. Others?

✅ USA Made	Designed & built by hardworking Americans
✅ FREE Powder Coat	We don't upcharge for powder coat
✅ FREE Shipping	That's right, no surprises at checkout
✅ Lifetime Warranty	If it's not right, we'll make it right
✅ Ultimate Protection	HD DOM steel mounts directly to the frame
✅ Guaranteed Stoke	Increases stoke level and driver confidence

Features:

• Made in the USA
  
• Full American Steel 1.75" DOM Tubing
  
• Gusseted Corners for Extra Strength
• Black Textured Power Coat Included
• 0 Degree Angle
• Perfect Balance of Slider AND Step
• Bolt On Aluminum Top Plate (won't rust from stepping in and out)
• Grade 8 Hardware for Install Included
• FREE SHIPPING!
  • $325 in savings!
  • (Lower 48 states only) 

Fitment & More Info:

• Fits 2005-2023 double cab short bed Tacomas
• Fits 2005-2023 access cab long bed Tacomas
• Does NOT fit double cab long bed Tacomas
  
• 100% Bolt On
• Installation Video HERE

2nd & 3rd Gen Toyota Tacoma Roof Rack

Our DRIFTR series roof rack for the 2005-2023 2nd and 3rd gen Toyota Tacoma not only gives you tons of added utility, but it unlocks an ecosystem of customization options to fully dial in your rig. Our racks are modular, light weight, super tough, have a low profile, install quickly, allow easy customization, have provisions for front and rear lighting, and ship cheap directly to your door. Dial in your rack exactly how you want it with our Universal Accessory Deck Panels and Awning Brackets.

Why Backwoods vs. Others?

✅ USA Made	Designed & built by hardworking Americans
✅ FREE Powder Coat	We don't upcharge for powder coat
✅ FREE Shipping	That's right, no surprises at checkout
✅ Lifetime Warranty	If it's not right, we'll make it right
✅ One Man Installation	Installs in step by step pieces
✅ Guaranteed Stoke	Increases stoke level and driver confidence

Features:

• Made in the USA
• Made from super thick 1/4" aluminum
• See all compatible accessories below
• Adjustable front fairing
• 1x3 triple-slotted extrusions to mount accessories
• Includes roll in T-nut hardware to mount accessories
• Side rail handle cutouts
• Pre-drilled side holes/slots to mount extrusions anywhere along rack
• Slotted (1/4” & 3/8”) cutouts on front/rear fairings for light mounting
• Rear chase light pockets (tabbed design allows easy optional cutout)
• Light pockets fit  Baja Designs S1 & S2 lights or any similar sized light
• Includes 5 extrusions (1 is used to stiffen the front fairing)
• Additional optional extrusions sold in pairs 
• Accessories on roof rack in product photos NOT included
• Weight: 46lbs
• FREE SHIPPING!
  • $100 in savings!
  • (Lower 48 states only)

Optional Add-ons:

• HD Awning Mounts
• Universal Accessory Deck Panels
• Dogbone Traction Board Mount
• Agency 6 Handles (not sold through us)

Fitment & More Info:

• Fits (2005-2023) Double Cab Toyota Tacomas
• Includes 3M tape and sealant for installation
• No drilling required, simple bolt on installation
• Installation Video: HERE
• Static Weight Rating: 700lbs*
• Dynamic Weight Rating: 300lbs*
• *Weight Rating* Our roof rack far exceeds Toyota's factory weight ratings and is more than strong enough to safely carry equipment like roof top tents, fuel cans, offroad jacks, or storage boxes. Additionally, when parked, you will have no issues supporting all of that gear plus 2-3 people.

The Hefty Fabworks Body Mount Relocation kit is the ultimate solution for fitting larger tires on your 4Runner, Tacoma or GX. Unlike some other kits on the market, our relocation kit is designed to add strength to the frame and body mount while increasing the tire clearance. No more compromising the frame structure with poorly designed products, we provide a large frame plate that is welded into the frame and spreads the load across a large area, spanning across the original body mount areas and frame holes to eliminate frame cracking and structure issues associated with many relocations. 

Made in the USA!!

CNC laser cut and formed in house at Hefty Fabworks in Colorado Springs, CO

Kit includes: Drivers and Passenger side mounts, Two backer plates, Lower gusset plates, New Bushings and hardware to complete your install.

Installation:

Installation should be done by a professional and requires cutting, grinding and welding. The quality of the welding will determine the strength of the final product so pick your installer with this in mind. Average install time 5 hours.

Support the body of the vehicle with jacks or use a wedge between the body and frame to maintain the correct spacing. (don't forget to remove the wedge after the install is completed)

Pulling the interior floor carpet back, find the factory body mount bolt and remove the bolt from the vehicle. Remove the body mount.

Cut the factory body mount off the vehicle making sure not to cut into the frame, grind smooth.

Install the supplied frame plate: determine the location of the frame plate with the new body mount, start tacking the plate in at the rear portion. The plates are flat when they come to you, we recommend welding the section of the plate to the frame that sits flat, then while hot use a large hammer to for the plate to the frame towards the front of the vehicle and continue your weld as you go.

Install the body mount plate with the new hardware and tighten to compress the bushing. Tack weld the bracket into place then remove the bushing and hardware. Fully weld the mount into place, then weld in the lower brace. Wait for the brackets to cool then paint with a high quality paint before installing bushings.  

The New High Clearance Front Bumper

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The all new Hefty Fabworks high clearance Steel Bumper for your 2016 - 2023 Tacomas.

Designed here in house all out of top grade 3/8'' and 3/16'' steel with 1/4'' steel frame mounts, this bumper offers it all.
- 3/16'' winch plate
-Recovery points to fit 7/8'' recovery shackles
- Full integrated structured tabs to freely mount all of your offroad lighting options to optimize your visual needs for overlanding and Instagram feeds (lets be honest, no one needs that much lighting, but it looks cool)
-All raw, unfinished steel bumpers come DA sanded and pre-prepped for powder coating.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

Weight - 130lbs 

Product winch and lighting recommendations

Winch - Zeon 10K Found HERE 

Baja Designs listing

- LP9 found HERE 

- Squadron SAE found HERE

-Squadron sports found HERE

- Baja Designs 30'' upper light bar found HERE 

- Baja Designs S2 

Winch, lighting and accessories not included in price 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016-2022 Tacoma

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2016 - 2023 Toyota Tacoma Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

***Note: Transfer Case Skid requires one hole to be drilled into frame.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, Transfer Case requires one hole to be drilled into the frame.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 11 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2016 - 2023 Toyota Tacoma Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 23 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2016 - 2023 Toyota Tacoma Radiator/Engine Skid is the ultimate front-end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on transmission skid and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2016 - 2023 Toyota Tacoma Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

***Note: Transfer Case Skid requires one hole to be drilled into frame. Gas tank skid requires OEM TRD brackets and hardware to mount.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, Transfer Case skid requires one hole to be drilled into the frame.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 90 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

---

Package includes Radiator/Engine, Transmission, and Transfer Case. Full set reduces the shipping cost of individual skids.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments, an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022