Tacoma 2005 - 2015

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

2005 - 2015 Toyota Tacoma Tube Winch Bumper
Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA virgin steel, the 3/16" thick mounting plate, 3/8" thick uprights, and sleeved integrated recovery points make this a very strong and lighter weight bumper vs most steel bumpers on the market for your Tacoma. Yes you can run this bumper without suspension modifications but we recommend 650lb springs for your front suspension when running a winch. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 2nd Gen Tacoma. Please select vehicle model in options list.

Bumpers come raw steel ready to be coated by you.

Winch capable up to 10,000 lb with non integrated solenoid. May require relocation of control box to fit winch.
This bumper requires trimming the factory bumper cover.
Mounting tabs for 3 lights on top bar and additional mounting locations for aftermarket fog lights in the bumper wings (7 tabs total). Most 3 1/2" fog lights or Pods will fit. Fits up to a 30” light bar (may require a U cradle or other mounting bracket to work), two Baja Designs LP9's, or three Baja Design LP6's or similar.

Bolt on application

Items Included:
(1) Bare Front Tube Bumper
(1) Aluminum Filler Panel
(1) Frame Mount Set
(2) 12mm x 35mm Bolts
(14) 1.5" Fender Washers
(6) 0.5" Grade 8 Bolts
(6) Lock Washers
(6) 0.5" Nuts
(8) 3/8" Fender Washers
(8) 10mm x 45mm Bolts

Weight: 98 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Shipping Information:
This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping to AK, HI, or outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location and customer is responsible for any additional shipping costs. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (minor cutting of factory bumper cover)
Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.
Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

The Hefty Fabworks 2nd Gen Tacoma Rock Sliders provide the ultimate protection and functionality. 100% bolt on and available for all platforms. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, using all American top quality steel. All sliders are assembled using a set jig to eliminate human error and to assure a perfect fit for every platform, every time. The integrated kick out and tread plate feature give your sliders not only the strength to take on the trail but the function of a convenient step.

• Features a mild bump out at the rear section.

• 100% Bolt-On installation to vehicle frame - no modification required.

• All hardware provided.

Product Specifications:

Material - 2" x 2" x .188" sq. tube | 1.75" x .120" round DOM tubing
Finish - This product ships bare metal and will need to be coated before install

• Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA
This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up or In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2011, 2012, 2013, 2014, 2015

2005-2015 Toyota Tacoma Aluminum Winch Bumper

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes, you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9,500lbs with standard 10" x 4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the 2nd Gen Tacoma. See options above.

• Made in 5052 H34 1/4" Aluminum from USA.

• Recessed lighting holes for 3.5-4" aftermarket lights

• Low hoop design allows for 30" Single Row LED Light.

• Complete bolt on installation w/ minimal cutting required.

• All raw, unfinished aluminum is DA sanded and comes pre-prepped for powder coat.

• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Introducing Hefty Fabworks Bed Stiffeners for the 2nd Gen Tacoma. These were designed with the intentions of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

**Requires Drilling**

***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021