NISSAN XTERRA

XTERRA LOW HOOP

***Bumper will feature new fog light housing design. OEM Fog lights will no longer work. You must run aftermarket LED fog lights. See the Tall Hoop Xterra bumper for photo example.

***Estimated production lead time is 16-20 weeks

The new Hefty Fabworks 2005+ Xterra Aluminum Bumper is now available! Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened and sleeved integrated recovery points make this a very strong and very light weight bumper (only 55 lbs.) for your Xterra. Similar in strength to our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic line winches strongly suggested with our Aluminum series bumpers.

NOTE: Vehicle in photos shown with 2" BL Filler Panel

• Made of 5052 H34 1/4" and 3/8" Aluminum
• Recessed light holes for aftermarket LED lights.
• Low hoop design allows for 20" Single Row LED Light Bar.
• Complete bolt on installation, minor trimming required.
• Available in raw, unfinished aluminum 
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 
• Radiator skid plate optional, please add to order if needed. (Recommended)

DO YOU HAVE A 2" BODY LIFT? CLICK HERE FOR BODY FILL PANEL 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships Old Dominion freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (Bolt on/ minor trimming of inner fender liners required)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide. 

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

XTERRA TALL HOOP

***Estimated production lead time is 16-20 weeks

The new Hefty Fabworks 2005+ Xterra Aluminum Bumper is now available! Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened and sleeved integrated recovery points make this a very strong and very light weight bumper (only 55 lbs.) for your Xterra. Similar in strength to our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic line winches strongly suggested with our Aluminum series bumpers.

• Made of 5052 H34 1/4" and 3/8" Aluminum
• Recessed light holes for aftermarket LED lights.
• Low hoop design allows for 20" Single Row LED Light Bar.
• Complete bolt on installation, minor trimming required.
• Available in raw, unfinished aluminum
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.
• • This product ships bare metal and will need to be coated before install
  • Powder coating options are available for local installation - please call us for more details 
• Aluminum Radiator skid plate optional, please add to order if needed. (Recommended)

DO YOU HAVE A 2" BODY LIFT? CLICK HERE FOR BODY FILL PANEL 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships Old Dominion freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (Bolt on/ minor trimming of inner fender liners required)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide. 

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005+ Nissan Xterra / Frontier

***Estimated production lead time is 8-10 weeks

The engine skid plate will cover and protect the trucks low hanging aluminum front differential and the oil pan on the Xterra and Frontier. By design, it will provide easy access to drain the engine oil.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling.

The engine skid plate requires drilling four 3/8” holes – this is to make it stronger without relying on the weak M8 OEM holes. If the radiator skid plate was purchased – it will share two holes with that one.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 15 lbs

Steel: 32 lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

2005+ Nissan Xterra / Frontier

***Estimated production lead time is 8-10 weeks

The Hefty Fabworks Radiator Skid Plate will cover the trucks low hanging radiator on the Frontier.

The skid plate is made of 1/4" thick aluminum CNC cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Will work with factory tow hooks.

***Will NOT work with drop bracket lift kits.***

Weight: 

Aluminum: 15 lbs

Steel: 32 lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 

For Nissan Xterras with a 2" body lift. This bolt on panel fills the gap between the radiator skid plate and the front bumper associated with running a 2" body lift. In addition to the aesthetic appeal, this panel adds additional strength to the leading edge of the radiator skid. ***Will only work with the Hefty Fabworks Radiator skid plate, as this panel bolts directly onto it.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

 ***NOTE: We no longer offer a powder coat option. Bumpers in photos are shown with powder coat. Bumper will ship bare steel.

***Estimated production lead time is 16-20 weeks

Introducing the new Hefty Fabworks Xterra steel tube style winch bumper. This bumper is built to be beat and abused while still remaining a lighter weight and stylish option. Utilizing 3/8" upright mounts, 1-3/4" steel tubing, and a 1/4" winch mount with built in recovery points. The bumper works with our standard Radiator Skid and it is adjustable for a 2" body lift. There are double light mounts in each wing section as shown as well as four additional mounting tabs on the upper portion of the bumper. We are able to add additional tubing to the grill area if wanted but the bumper maintains a very clean appearance without it in our opinion. This is great alternative to our full plate winch bumper while saving about 50lbs of weight. Accepts several popular winches including the Warn VR8000/10000, Zeon 8000/10000 etc. Requires relocation of winch control box. Call to verify winch compatibility.

Note: The bumper alone does not protect the lower radiator and a skid plate is required. The stock radiator skid will not fit with this bumper and we highly recommend getting our radiator skid in addition to the bumper to provide the protection required.

Note: The lower aluminum filler plate/skid was painted yellow to match the decals and springs on Brady's Xterra. Comes in raw aluminum. Sorry, we do not offer custom colors but the plate can be easily painted to the color of your choice.

Bumper Weight: 85 lbs (skid additional)

Shipping weight: 160 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Powder coating required for local installation. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

***Skids will be our new designed skids, full set photos to come soon. Refer to single skid plates for photos currently. Radiator skid is a new design as shown in second photo.

***Estimated production lead time is 8-10 weeks

2005-2015 Nissan Xterra

These skid plates are made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling. This product does not include the Radiator skid. (Add on using the options above)

Besides giving you peace of mind, these skid plates will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

Weight:  lbs

Full set reduces the shipping cost of individual skids costs.

Part Numbers:

(Optional) Radiator: 220311

Engine: 220321

Transmission: 221331

Transfer Case: 213341

Gas Tank: 221351

---

Built by skilled craftsmen in Colorado Springs, CO USA

Orders to Hawaii, Alaska, or outside the continental United States please call for a shipping quote. Shipping rates will be adjusted prior to shipment.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

REAR BUMPER WITH SWING ARM

This product is built in batches. Lead times are estimated at 8-12 weeks. Next batch is expected to be built and shipped around March 31st.

Powder coating is available only for local pick-up and installations.

2005-2015 Xterra Rear Bumper

Hefty Fabworks is proud to offer our heavy duty rear bumper. Replace your thin stock bumper with a solid built replacement bumper. Built from 3/16" A36 American Steel and 1/4" mounting plates. All of our rear bumpers include 1" solid recovery points and built in receiver hitch. Compatible with most aftermarket ladders. Comes standard with license plate mount & light. Includes swing out tire carrier. Includes hi-lift mounting and all hardware for a simple install. Redesigned hinge and latch design for an incredibly strong and stout tire carrier. 

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

NO SWING ARM REAR BUMPER 

This product is built in batches. Lead times are estimated at 8-12 weeks. 

Powder coating is available only for local pick-up and installations.

2005-2015 Xterra Rear Bumper

Hefty Fabworks is proud to offer our heavy duty rear bumper. Replace your thin stock bumper with a solid built replacement bumper. Built from 3/16" A36 American Steel and 1/4" mounting plates. All of our rear bumpers include 1" solid recovery points and built in receiver hitch. Compatible with most aftermarket ladders. Comes standard with license plate mount & light and a CB antenna mount. Optional swing out tire carrier available. Includes hi-lift mounting and all hardware for a simple install.

Weight: No Swing Arm: 60lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

HeftyFab Installation Rating: 2 (bolt-on/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005-2015 Xterra sliders

***Estimated production lead time is 10-12 weeks

Built to be abused over and over and leave your Xterra fully protected.

Standard Features:

• Full fender to fender coverage
• Integrated dimple died tread plate steps for easy vehicle entry
• 2 Tube supports
• 1 3/4" X .120 wall DOM outer rub rail
• 2x3 x 3/16" wall main structure
• 2 mounting points to the frame
• Bolt on ( drilling required (qty 2) 1/2" holes )

Body Lift option. Raises Sliders up 2". Must have a body lift installed to be able to install these sliders. ***NOTE: A suspension lift is different than a body lift. If you are only doing a suspension lift (changing the coilovers for example) then you do not need to select this option.

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

---

Built by skilled craftsmen in Colorado Springs, CO USA

All Rock Sliders ship freight only to a business location or pick up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

All Hefty Fabworks Rock Sliders are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (bolt-on//drilling/weight)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

2005-2015 Nissan Xterra ONLY

***Estimated production lead time is 8-10 weeks

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

The T-Case skid plate will cover and protect the very vulnerable Transfer Case on your Xterra.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

Besides giving you peace of mind, this skid plate will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

Aluminum: 13 lbs

Steel: 30 lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

ITS BACK AND BETTER!!!

2005-2015 Xterra Steel 3 hoop Bumper
For those that have been asking, we listened and have brought back the full grill guard steel bumper for the 2nd gen Nissan Xterras! 
Built from 3/16'' thick US steel
Accepts most common winch footprints, up to 12k.
Weight: 135lbs 
***Comes raw finish will need to be painted or coated prior to install***

• This product ships bare metal and will need to be coated before install
• Powder coating options are available for local installation - please call us for more details 

2005-2019 Nissan Xterra / Frontier

***Estimated production lead time is 8-10 weeks

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 FRONTIER MODELS***

The Gas Tank skid plate will cover and protect the plastic gas tank on the Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation. This skid plate requires no drilling.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 19 lbs

Steel: 51 lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2005-2019 Nissan Xterra / Frontier

***Estimated production lead time is 8-10 weeks

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 Frontier***

The Transmission Skid Plate will cover and protect the transmission on your Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation.

The transmission skid plate does not require to drill any holes.

Since this is the biggest skid out of all we decided to attach it to the frame on the middle sides to make it extremely strong, as it should be.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 21 lbs

Steel: 46 lbs

---

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***If not in stock, this product is subject to the manufacturer's lead time.

Agency 6™ Billet Winch Shackle:

Field serviceable winch attachment made from US Certified 6061 T6 CNC machined aluminum with a 17-4 hardened stainless pin.
Lightweight design with a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.

Integrated cover minimizes abrasion and UV damage to synthetic line.

Stays looking great thanks to UV and abrasion resistant coating.

*Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, shackle, etc)

Finish: Powder Coat
Made in U.S.A. - Limited Lifetime Warranty.

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.0" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.5" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

***If not in stock, this product is subject to the manufacturer's lead time.

The Adventure Mini Shovel 2 is a lightweight multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc.  

Increased length makes for less effort while digging out tires, brush, etc. 

Hand welded construction, made in the USA.

Material: 6061-T6 Aluminum

Weight: 2.5 lbs

Length: 32 inches

Finish: Textured Power Coated

***If not in stock, this product is subject to the manufacturer's lead time.

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Black Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

 

Includes:

• Shackle Block
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

***If not in stock, this product is subject to the manufacturer's lead time.

Pair of knobs to mount your Agency 6 shovel to our mounting devices.

All metal construction will not rust or degrade outdoors.

3/8-16 threads

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Adventure Mini Shovel / Mount combo is a convenient, complete shovel and mount package. 

The Adventure Mini Shovel (AMS-1) is a lightweight, hand-welded, multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc. Shovel includes built-in mounting holes (6" apart).

- Material: 6061-T6 Aluminum
- Weight: 1.75 lbs
- Length: 23 inches
- Finish: Power Coated Textured

The UMD (Universal Mount Device) is a billet aluminum universal mounting bracket that can mount on multiple applications, such as round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road tools or accessories in any desired location on vehicles or equipment.

*Minimum diameter tubing for UMD mounting is 1.5"

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- BPowder coat Finish

- Made in the USA

*Shovel/Mount Combo includes: x1 Adventure Mini Shovel - x2 UMD - x4 bolts - x2 Shovel Knobs

***If not in stock, this product is subject to the manufacturer's lead time.

The SSM (Surface Shovel Mount) is a billet aluminum mounting bracket designed to  mount onto flat applications, such as Roof racks, carrier boxes, and MOLLE panels. Dual mounting angles allow for better clearance when mounting near roof rails or other obstacles. Threaded holes in the rear allow you to mount this directly onto the surface with 1/4-20 hardware (included). Mounting holes are spaced 6" apart.

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- Powder coat Finish
- Stainless mounting hardware included

 
- Made in the USA

***If not in stock, this product is subject to the manufacturer's lead time.

The Universal Mount Device (UMD) is a billet aluminum universal mounting bracket that can mount on multiple applications such as, round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road equipment in any desired location on flat surfaces, roll bars or other tubing used on the vehicle. 

*Minimum diameter tubing for MMD mounting is 1.5"

Designed to work with Agency 6™ Shovels 

- Material: 6061-T6 Billet Aluminum

- Powder Coat - Stays looking great thanks to UV and abrasion resistant coating

- Made in USA

*Includes: x2 Clamp assemblies - x4 bolts 

Part of ARB's integrated 4X4 suspension systems, Emu Dakar leaf springs are engineered to provide optimum ride performance irrespective of the operating conditions the vehicle's suspension is required to work under. Numerous spring options are available to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes. Feature packed, a set of Emu Dakar leaf springs matched to a set of Old Man Emu 4X4 shock absorbers will deliver vastly improved ride, handling and load carrying capability.

This Part Fits:

Year	Make	Model	Submodel
2005-2010	Nissan	Xterra	Off-Road
2011-2015	Nissan	Xterra	PRO-4X
2005-2015	Nissan	Xterra	S
2000-2010	Nissan	Xterra	SE
2006-2015	Nissan	Xterra	X
2000-2004	Nissan	Xterra	XE

Hefty Fabworks Flat Bill Flexfit Hat

Sizes:

M/L: 6 1/8" - 7 1/4"

L/XL: 7 1/4" - 7 5/8"

Embroidered with Hefty Fabworks HF Logo

210 Fitted Flexfit Flat Bill
83% Acrylic
15% Wool
2% Spandex

Hefty Fabworks Flexfit Mesh Hat Black

One size fits all

Embroidered with Hefty Fabworks HF Logo

55% Polyester
43% Cotton
2% Spandex