HEFTY FABWORKS PRDOUCTS

2010 - 2024  4Runner Washer bottle reservoir skid
***FREE SHIPPING***

• Designed and built in house to take a beating!
• Steel Construction
• Direct bolt in application 
• Protects stock washer bottle reservoir without modification 
• Works with all aftermarket bumper applications!
• Raw unfinished ready for paint

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The engine skid plate will cover and protect the trucks low hanging aluminum front differential and the oil pan on the Xterra and Frontier. By design, it will provide easy access to drain the engine oil.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling.

The engine skid plate requires drilling four 3/8” holes – this is to make it stronger without relying on the weak M8 OEM holes. If the radiator skid plate was purchased – it will share two holes with that one.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 15 lbs

Steel: 32 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Free shipping to the lower 48 states.

2010+ 5th Gen 4Runner Cooler Line Skids

Adds protection to your exposed cooler lines.

Comes in a set of 2 (driver and passenger side)

***Note: These are already included with the 5th Gen 4Runner aluminum front bumper

Built by skilled craftsmen in Colorado Springs, CO USA

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

The Hefty Fabworks Radiator Skid Plate will cover the trucks low hanging radiator on the Frontier.

The skid plate is made of 1/4" thick aluminum CNC cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Will work with factory tow hooks.

***Will NOT work with drop bracket lift kits.***

Weight: 

Aluminum: 15 lbs

Steel: 32 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 

Free shipping to the lower 48 states.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

2005-2015 Nissan Xterra

These skid plates are made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling. This product does not include the Radiator skid. (Add on using the options above)

Besides giving you peace of mind, these skid plates will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

Weight:  lbs

Full set reduces the shipping cost of individual skids costs.

Part Numbers:

(Optional) Radiator: 220311

Engine: 220321

Transmission: 221331

Transfer Case: 213341

Gas Tank: 221351

Built by skilled craftsmen in Colorado Springs, CO USA

Orders to Hawaii, Alaska, or outside the continental United States please call for a shipping quote. Shipping rates will be adjusted prior to shipment.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

***For NON-KDSS vehicles

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle.

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

2005-2019 Nissan Xterra / Frontier

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 Frontier***

The Transmission Skid Plate will cover and protect the transmission on your Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation.

The transmission skid plate does not require to drill any holes.

Since this is the biggest skid out of all we decided to attach it to the frame on the middle sides to make it extremely strong, as it should be.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 21 lbs

Steel: 46 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Designed slightly lower than stock to work with or without a differential drop without using spacers for lifted vehicles. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

2005-2019 Nissan Xterra / Frontier

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 FRONTIER MODELS***

The Gas Tank skid plate will cover and protect the plastic gas tank on the Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation. This skid plate requires no drilling.

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: 

Aluminum: 19 lbs

Steel: 51 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2005-2019 Nissan Frontier ONLY

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

***DOES NOT FIT 2020 MODELS***

The Transfer Case skid plate will cover and protect the very vulnerable transfer case on the Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

CCshort Aluminum: 18 lbs

CClong Aluminum: 23 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2005-2015 Nissan Xterra ONLY

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

*Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories.*

The T-Case skid plate will cover and protect the very vulnerable Transfer Case on your Xterra.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

Besides giving you peace of mind, this skid plate will help you get over obstacles by preventing your chassis cross-members from catching on whatever you're driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

Aluminum: 13 lbs

Steel: 30 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2010+ 4Runner Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your 4Runner.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2010+ 4Runner Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. 2022, 2023

***For vehicles with KDSS***

 **Estimated production lead time is 8-12 weeks**

 Call to get current lead times. 

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2010+ 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Non-KDSS and KDSS models available

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

• Provides catalytic converter protection.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

For Nissan Xterras with a 2" body lift. This bolt on panel fills the gap between the radiator skid plate and the front bumper associated with running a 2" body lift. In addition to the aesthetic appeal, this panel adds additional strength to the leading edge of the radiator skid. ***Will only work with the Hefty Fabworks Radiator skid plate, as this panel bolts directly onto it.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2010+ 4Runner Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

For those who choose to keep the factory front sway bar, use our Sway Bar Skid Plate for added protection and a cleaner look. Built 100% in house at our Colorado Springs, CO manufacturing facility from US materials. Don't settle for less.

• Materials: 3/16" P&O steel 
• Finish: Bare Steel, DA Sanded, Lightly oiled
• Installation: Bolt on
• Product weight: 16 lbs

2022+ Nissan Frontier

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

These skid plates are made of 1/4" thick aluminum CNC laser cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling. This product does not include the Radiator skid. (Add on using the options above)

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

(Optional) Radiator: 220311
Engine: 220321
Transmission: 220331
Transfer Case: 22034S1
Gas Tank: 220351

__________________________________________

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Will work on Non-KDSS GX470's ONLY***

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003 - 2009 Lexus GX470 Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Lexus.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Non-KDSS only

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes: Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone on transmission/transfer case skid and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

Includes:

-Radiator/Engine Skid Aluminum

-Transmission/Transfer Case Skid Aluminum

What makes these better than the competition?

The Hefty Fabworks 2007-2021 Toyota Tundra Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Tundra.

***NOTE: NOT compatible with 8 foot bed models.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components. Includes built-in oil drain ramp.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 102 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine and Transmission/Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments, an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

2020+ Nissan Frontier

Free shipping to the lower 48 states.

 **Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

The Transfer Case skid plate will cover and protect the very vulnerable transfer case on the Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the truck's frame and is designed for easy bolt-up installation. The T-case skid plate requires no drilling.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

CCshort Aluminum:  17 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2020, 2021, 2022

2020+ Frontier

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

The Transmission Skid Plate will cover and protect the transmission on your Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation.

The transmission skid plate does not require drilling any holes.

Since this is the biggest skid out of all we decided to attach it to the frame on the middle sides to make it extremely strong, as it should be.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight: Aluminum: lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2020, 2021, 2022

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003-2009 4Runner Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

 2020-2021 Nissan Frontier

**Estimated production lead time is 6-8 weeks**

 Call to get current lead times.

These skid plates are made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation with minimal drilling. This product does not include the Radiator skid. (Add on using the options above.)

Besides giving peace of mind, these skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

Part Numbers:

(Optional) Radiator: 220311
Engine: 220321
Transmission: 220331
Transfer Case: 22034S1
Gas Tank: 220351

__________________________________________

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2020+ Nissan Frontier

Free shipping to the lower 48 states.

**Estimated production lead time is 6-8 weeks**

Call to get current lead times.

***Our skids are not guaranteed to fit with other manufacturers' skid plates or accessories. 

The Gas Tank skid plate will cover and protect the plastic gas tank on the Xterra or Frontier.

The skid plate is made of 1/4" thick aluminum CNC plasma cut and bent to specification to add strength and to reinforce the edges. That's a 33% increase in material thickness and strength compared to our previous skid plates! It does mount solidly to the frame of the truck and is designed for easy bolt-up installation. This skid plate requires no drilling.

These skid plates will help the truck get over obstacles by preventing the truck chassis cross-members from catching on whatever it is driving over.

With our aluminum skids, enjoy peace of mind knowing that the vital components of the truck are protected without sacrificing fuel economy.

Weight:

Aluminum: 19 lbs

Steel: 51 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once an order is placed there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2020, 2021, 2022

***Current photos showing 5th gen 4Runner but GX470 are similar.***

**Estimated production lead time is 8-12 weeks**

 Call to get current lead times.

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your GX70.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but GX470 are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your GX470.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but GX470 are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 Lexus GX470 Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your GX470.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.