TOYOTA FJ CRUISER

***Estimated production lead time is 8-10 weeks

The Hefty Fabworks FJ Cruiser Gas Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your FJ Cruiser.

• Protects the entire fuel tank without interference of driveshaft.

• Slotted openings to allow for water and debris drainage.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 8-10 weeks

The Hefty Fabworks FJ Cruiser Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your FJ Cruiser.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 8-10 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks FJ Cruiser Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your FJ Cruiser.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks FJ Cruiser Radiator/Engine Skid is the ultimate front-end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your FJ Cruiser.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on transmission skids and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks FJ Cruiser Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your FJ Cruiser.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014