TOYOTA FJ CRUISER

***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 16-20 weeks

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your FJ Cruiser. Similar in strength as our Steel Series bumpers at about 1/3rd the weight (45 lbs), it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum bumpers. Available for all models and years for the FJ Cruiser. 

• Made in 5052 H34 1/4" Aluminum from USA.

• Optional Low hoop design allows for 20" Single Row LED Light.

• Recessed light holes for fog light mounting.

• Complete bolt on installation. Slight trimming of inner finder liner required.

• Available in raw, unfinished aluminum or Powder Coated in Semi Gloss Black textured finish.

• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships truck freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Bumpers are built to order and require a 16-20 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details.

HeftyFab Installation Rating: 2 (trimming/bolt on)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide. 

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Black Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

Includes:

• Shackle Block
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Pair of knobs to mount your Agency 6 shovel to our mounting devices.

All metal construction will not rust or degrade outdoors.

3/8-16 threads

The Universal Mount Device (UMD) is a billet aluminum universal mounting bracket that can mount on multiple applications such as, round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road equipment in any desired location on flat surfaces, roll bars or other tubing used on the vehicle. 

*Minimum diameter tubing for MMD mounting is 1.5"

Designed to work with Agency 6™ Shovels 

- Material: 6061-T6 Billet Aluminum

- Powder Coat - Stays looking great thanks to UV and abrasion resistant coating

- Made in USA

*Includes: x2 Clamp assemblies - x4 bolts 

The Adventure Mini Shovel 2 is a lightweight multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc.  

Increased length makes for less effort while digging out tires, brush, etc. 

Hand welded construction, made in the USA.

Material: 6061-T6 Aluminum

Weight: 2.5 lbs

Length: 32 inches

Finish: Textured Power Coated

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

The SSM (Surface Shovel Mount) is a billet aluminum mounting bracket designed to  mount onto flat applications, such as Roof racks, carrier boxes, and MOLLE panels. Dual mounting angles allow for better clearance when mounting near roof rails or other obstacles. Threaded holes in the rear allow you to mount this directly onto the surface with 1/4-20 hardware (included). Mounting holes are spaced 6" apart.

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- Powder coat Finish
- Stainless mounting hardware included

 
- Made in the USA

The Agency 6 Adventure Mini Shovel / Mount combo is a convenient, complete shovel and mount package. 

The Adventure Mini Shovel (AMS-1) is a lightweight, hand-welded, multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc. Shovel includes built-in mounting holes (6" apart).

- Material: 6061-T6 Aluminum
- Weight: 1.75 lbs
- Length: 23 inches
- Finish: Power Coated Textured

The UMD (Universal Mount Device) is a billet aluminum universal mounting bracket that can mount on multiple applications, such as round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road tools or accessories in any desired location on vehicles or equipment.

*Minimum diameter tubing for UMD mounting is 1.5"

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- BPowder coat Finish

- Made in the USA

*Shovel/Mount Combo includes: x1 Adventure Mini Shovel - x2 UMD - x4 bolts - x2 Shovel Knobs

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.5" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.0" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

Agency 6™ Billet Winch Shackle:

Field serviceable winch attachment made from US Certified 6061 T6 CNC machined aluminum with a 17-4 hardened stainless pin.
Lightweight design with a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.

Integrated cover minimizes abrasion and UV damage to synthetic line.

Stays looking great thanks to UV and abrasion resistant coating.

*Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, shackle, etc)

Finish: Powder Coat
Made in U.S.A. - Limited Lifetime Warranty.

***Please contact us for availability. 

96504 - Total Chaos Uniball Upper Control Arms

• 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
• CNC machined slug adapters press into the spindle and convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
• TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
• Custom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel. The lower hi-misalignment spacer registers into the slug adapter for maximum strength.
• Upper control arms combined with extended length coil over shocks will allow for up to 1" of additional wheel travel.
• Urethane bushings reduce bushing deflection compared to stock rubber bushings.
• Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
• 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
• Complete grade 8 hardware kit is included.
• Fits all 6 wheel lug: '05+ Tacoma, '03+ 4Runner, & '07-14 FJ Cruiser, 03+GX470/GX460

***Please contact us for availability. 

25480 - SPC Adjustable Upper Control Arms for FJ Cruiser, 03-Current 4Runner and 03+ Lexus GX470/GX460

Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC's forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

• Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC's arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

• On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

***Free Shipping Applies to the Lower 48 US States***

Please read full description before ordering.

***Estimated production lead time is 8-10 weeks

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top-quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships ground and can be shipped to a residential address. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Rock Sliders are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 8-10 weeks

The Hefty Fabworks FJ Cruiser Gas Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your FJ Cruiser.

• Protects the entire fuel tank without interference of driveshaft.

• Slotted openings to allow for water and debris drainage.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 8-10 weeks

The Hefty Fabworks FJ Cruiser Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your FJ Cruiser.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 8-10 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks FJ Cruiser Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your FJ Cruiser.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks FJ Cruiser Radiator/Engine Skid is the ultimate front-end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your FJ Cruiser.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on transmission skids and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks FJ Cruiser Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your FJ Cruiser.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014