HEFTY FABWORKS PRDOUCTS

New upgraded design!  

Note: Photo shows stainless steel. Product is now made using Aluminum. This product is laser cut aluminum comes unfinished, bare aluminum.

The new design allows you to mount a rocker switch next to the compressor and a manifold on the center bracket if you are running air lockers.

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Product ships in 5-7 days when in stock. Compressor sold separately.

Works only on 2010+ 4Runner (5th Gen) and works on 2020+ 4Runner's

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

2016-2023 Tacoma

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

2010+ 4Runner Rear Bumper Hinge Assembly Replacement and Hardware Kit

Free shipping to the lower 48 states.

All the parts needed to repair and replace worn out swing arm hinge assemblies.

Sold individually. One kit per swing arm. 

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Introducing Hefty Fabworks Bed Stiffeners for the 3rd Gen Tacoma. These were designed with the intentions of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

**Requires Drilling**

Introducing Hefty Fabworks Bed Stiffeners for the 2nd Gen Tacoma. These were designed with the intentions of being the Swiss army knife of bed stiffeners while still providing one of the strongest structural supports for your Tacoma bed. 

Features:

• Made out of 3/16" thick steel
• Each stiffener features anchor points and a cleat to tie down cargo
• Bottle Opener 
• Flag or antenna mount

**Requires Drilling**