Name: Air Lift Replacement Air Spring - Sleeve Type
Brand: Air Lift
SKU: ALF50291
Price: 99.08 USD
Availability: InStock

Air Lift Replacement Air Spring - Sleeve Type

Air Lift

Air Lift Replacement Air Spring - Sleeve Type

ALF50291

$99.08

Shipping calculated at checkout.

This Air Lift replacement sleeve is an exact replacement for your original Air Lift air spring. It is made with sturdy rubber construction and synthetic fabric reinforcement. This sleeve has an inflated proper ride height of 6.0 to 8.0 inches and a maximum diameter of 5.1 inches. Genuine high-strength, rust-proof Zytel endcaps and an inverted crimp design help the air spring holds its shape for a long life. This replacement air sleeve is covered by a limited lifetime warranty.

Air Lift Universal 1000 4in/8in Air Spring Kit

Air Lift

Air Lift Universal 1000 4in/8in Air Spring Kit

ALF60909

$142.82

Shipping calculated at checkout.

With the ability to fit almost any open coil spring, the new Air Lift 1000 Universal kits from Air Lift are our most versatile ever. These new kits provide your vehicle with up to 1000 lbs. of load-leveling support, making your ride smooth and comfortable. Air Lift 100 Universal springs air to improve all aspects of your ride, eliminating squat, fixing poor headlight aim, and soaks up bumps, eliminating any sort of rough ride. Your coil-strung vehicle will drive smoothly and haul better than ever before with these kits installed. Finding the right kit for your vehicle is simple and as easy as 1-2-3! First, unload your vehicle and allow it to return to normal ride height. Then, measure the available inside height and available inside diameter of the vehicle's coil springs, finding the available height and width inside the springs. Finally, check out the chart provided by Air Lift and match your measurements with the corresponding kit numbers! Each Air Lift 1000 Universal Air Spring kit comes fully equipped with every part needed for a full installation. This includes two Air Lift 1000 air springs, made from durable, molded polyurethane, and two heat shields, with clamps. The kit also contains air line, tee, zip ties, two Schrader values, air spring spacers (if applicable), and, of course, detailed installation guides with advice for proper installation. Of course, all of our kits also come with Air Lift's 60-day, no questions asked, money-back guarantee. As the leader in air suspension products for over 60 years, Air Lift Performance is committed to delivering quality parts that last. To insure the highest quality, longevity, and customer satisfaction, the key components and air springs have all been rigorously tested. With a limited lifetime, unlimited-mileage warranty -- not to mention the Air Lift Performance reputation for great customer service and technical support -- you can purchase this kit with peace of mind. Air Lift's new Universal 1000 kits aim to t

Air Lift Universal Angled Air Spring Spacer - 4in Lift

Air Lift

Air Lift Universal Angled Air Spring Spacer - 4in Lift

ALF52445

$108.14

Shipping calculated at checkout.

For drivers of lifted trucks, it's common to find that the towing and hauling capabilities of the stock suspension are compromised. With the new Universal Air Spring Spacers from Air Lift, drivers are now able to add a load support solution and restore the full potential of the vehicle. Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches. These high-quality, " steel spacers are rated to handle more than 10 tons of force, making them tough enough to handle even the heaviest loads. With a unique spinal design, the spacers are easy to attach to bellows-style air spring systems, including Air Lift's best-selling LoadLifter 5000 series and LoadLifter 7500 XL, using the provided hardware. With air springs equipped, drivers of lifted vehicles will find that the towing and hauling capabilities of their vehicles are restored. Adding air springs will eliminate many common issues faced when towing and hauling heavy loads, including squat, poor headlight aim, trailer sway, and bottoming out. Drivers and passengers alike will notice that handling, ride quality, and braking power are all greatly improved. Each Universal Air Spring Spacer kit comes with a clear, easy-to-follow, fully illustrated instruction manual to make the installation process easy clear and simple. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a limited-lifetime warranty, you can purchase this kit with peace of mind. Take your existing air suspension solution to the next level of safety and comfort with Universal Air Spring Spacers today!

Air Lift Universal Angled Air Spring Spacer - 6 in Lift

Air Lift

Air Lift Universal Angled Air Spring Spacer - 6 in Lift

ALF52465

$116.22

Shipping calculated at checkout.

For drivers of lifted trucks, it's common to find that the towing and hauling capabilities of the stock suspension are compromised. With the new Universal Air Spring Spacers from Air Lift, drivers are now able to add a load support solution and restore the full potential of the vehicle. Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches. These high-quality, " steel spacers are rated to handle more than 10 tons of force, making them tough enough to handle even the heaviest loads. With a unique spinal design, the spacers are easy to attach to bellows-style air spring systems, including Air Lift's best-selling LoadLifter 5000 series and LoadLifter 7500 XL, using the provided hardware. With air springs equipped, drivers of lifted vehicles will find that the towing and hauling capabilities of their vehicles are restored. Adding air springs will eliminate many common issues faced when towing and hauling heavy loads, including squat, poor headlight aim, trailer sway, and bottoming out. Drivers and passengers alike will notice that handling, ride quality, and braking power are all greatly improved. Each Universal Air Spring Spacer kit comes with a clear, easy-to-follow, fully illustrated instruction manual to make the installation process easy clear and simple. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a limited-lifetime warranty, you can purchase this kit with peace of mind. Take your existing air suspension solution to the next level of safety and comfort with Universal Air Spring Spacers today!

Air Lift Universal Level Air Spring Spacer - 2in Lift

Air Lift

Air Lift Universal Level Air Spring Spacer - 2in Lift

ALF52420

$95.01

Shipping calculated at checkout.

For drivers of lifted trucks, it's common to find that the towing and hauling capabilities of the stock suspension are compromised. With the new Universal Air Spring Spacers from Air Lift, drivers are now able to add a load support solution and restore the full potential of the vehicle. Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches. These high-quality, " steel spacers are rated to handle more than 10 tons of force, making them tough enough to handle even the heaviest loads. With a unique spinal design, the spacers are easy to attach to bellows-style air spring systems, including Air Lift's best-selling LoadLifter 5000 series and LoadLifter 7500 XL, using the provided hardware. With air springs equipped, drivers of lifted vehicles will find that the towing and hauling capabilities of their vehicles are restored. Adding air springs will eliminate many common issues faced when towing and hauling heavy loads, including squat, poor headlight aim, trailer sway, and bottoming out. Drivers and passengers alike will notice that handling, ride quality, and braking power are all greatly improved. Each Universal Air Spring Spacer kit comes with a clear, easy-to-follow, fully illustrated instruction manual to make the installation process easy clear and simple. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a limited-lifetime warranty, you can purchase this kit with peace of mind. Take your existing air suspension solution to the next level of safety and comfort with Universal Air Spring Spacers today!

Air Lift Universal Level Air Spring Spacer - 4in Lift

Air Lift

Air Lift Universal Level Air Spring Spacer - 4in Lift

ALF52440

$108.14

Shipping calculated at checkout.

For drivers of lifted trucks, it's common to find that the towing and hauling capabilities of the stock suspension are compromised. With the new Universal Air Spring Spacers from Air Lift, drivers are now able to add a load support solution and restore the full potential of the vehicle. Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches. These high-quality, " steel spacers are rated to handle more than 10 tons of force, making them tough enough to handle even the heaviest loads. With a unique spinal design, the spacers are easy to attach to bellows-style air spring systems, including Air Lift's best-selling LoadLifter 5000 series and LoadLifter 7500 XL, using the provided hardware. With air springs equipped, drivers of lifted vehicles will find that the towing and hauling capabilities of their vehicles are restored. Adding air springs will eliminate many common issues faced when towing and hauling heavy loads, including squat, poor headlight aim, trailer sway, and bottoming out. Drivers and passengers alike will notice that handling, ride quality, and braking power are all greatly improved. Each Universal Air Spring Spacer kit comes with a clear, easy-to-follow, fully illustrated instruction manual to make the installation process easy clear and simple. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a limited-lifetime warranty, you can purchase this kit with peace of mind. Take your existing air suspension solution to the next level of safety and comfort with Universal Air Spring Spacers today!

Air Lift Universal Level Air Spring Spacer - 6in Lift

Air Lift

Air Lift Universal Level Air Spring Spacer - 6in Lift

ALF52460

$116.22

Shipping calculated at checkout.

For drivers of lifted trucks, it's common to find that the towing and hauling capabilities of the stock suspension are compromised. With the new Universal Air Spring Spacers from Air Lift, drivers are now able to add a load support solution and restore the full potential of the vehicle. Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches. These high-quality, " steel spacers are rated to handle more than 10 tons of force, making them tough enough to handle even the heaviest loads. With a unique spinal design, the spacers are easy to attach to bellows-style air spring systems, including Air Lift's best-selling LoadLifter 5000 series and LoadLifter 7500 XL, using the provided hardware. With air springs equipped, drivers of lifted vehicles will find that the towing and hauling capabilities of their vehicles are restored. Adding air springs will eliminate many common issues faced when towing and hauling heavy loads, including squat, poor headlight aim, trailer sway, and bottoming out. Drivers and passengers alike will notice that handling, ride quality, and braking power are all greatly improved. Each Universal Air Spring Spacer kit comes with a clear, easy-to-follow, fully illustrated instruction manual to make the installation process easy clear and simple. As the leader in air suspension products for more than 65 years, Air Lift is committed to delivering quality load support parts that last. The key suspension components have all been torture-tested to ensure the highest quality, longevity, and customer satisfaction. With a limited-lifetime warranty, you can purchase this kit with peace of mind. Take your existing air suspension solution to the next level of safety and comfort with Universal Air Spring Spacers today!

Air Lift Viair 444C Compressor - 200 PSI

Air Lift

Air Lift Viair 444C Compressor - 200 PSI

ALF16444

$341.62

Shipping calculated at checkout.

The 380C is a truly-rated continuous duty, 12-volt, 200 PSI compressor. It is capable of filling a 5-gallon tank from 165 PSI to 200 PSI in 3-1/2 minutes consistently, while never pulling more than 16 amps of power (13.8 volts). It is the choice for those who wish to keep the strain on their vehicles charging systems to a minimum. Features include a standard stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. Must be used with a 200 PSI or lower pressure, non-adjustable pressure switch when used with an air tank.

Air Lift Viair 444C Compressor - 200 PSI - Black

Air Lift

Air Lift Viair 444C Compressor - 200 PSI - Black

ALF16444B

$346.88

Shipping calculated at checkout.

Air Lift Company has developed dependable air spring suspension products since our inception in 1949. All our efforts are spent ensuring your safety and comfort by designing, engineering and manufacturing the highest quality suspension products.

Air Lift Viair 444C Dual Pack Compressor - 200 PSI

Air Lift

Air Lift Viair 444C Dual Pack Compressor - 200 PSI

ALF23444

$525.57

Shipping calculated at checkout.

444C dual pack compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. Included parts: (2) 444C Chrome Compressors Patents Pending Intercooler Head (2) Air Filter Assemblies (2) Remote Mount Brackets (2) Sets of Remote Mount Fittings (2) Sets of Spare Air Filter Elements (8) Sets of Nuts, Bolts, Washers and Lock Washers (2) Stainless Steel Braided Leader Hoses with Inline Check Valve (6) Airline Clips Does not include relays, pressure switch or air line for remote air filter relocation Specifications: 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI Max. Working Pressure: 200 PSI Max. Amp Draw: 38 Amps Net Weight: 21.60 lbs.

Air Lift

Air Lift Viair 444C Dual Pack Compressor - 200 PSI - Black

ALF23444B

$533.65

Shipping calculated at checkout.

444C dual pack compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts.

Air Lift Viair 480C Dual Pack Compressor - 200 PSI

Air Lift

Air Lift Viair 480C Dual Pack Compressor - 200 PSI

ALF23480

$703.49

Shipping calculated at checkout.

480C Dual Performance Value Packs include two 480C compressors, two heavy duty 40-amp relays and a 165 PSI cut-on, 200 PSI cut-off pressure switch. Each Dual Performance Value Pack comes with remote mount filter assemblies and mounting hardware. Dual Performance Value Packs are rated to fill tank volumes up to 10 gallons. Included parts: (2) 480C (Chrome or Pewter) Compressors (2) Air Filter Assemblies (2) Remote Mount Brackets (2) Sets of Remote Mount Fittings (2) Sets of Spare Air Filter Elements (2) Leader Hose Clips (6) Air Line Clips with Included Hardware (8) Sets of Nuts, Bolts, Washers and Lock Washers (1) Heavy Duty Tube Style Fuse Holder (Up to 60-amp fuse) (2) Heavy Duty 40-Amp Relays (1) One Heavy Duty Pressure Switch (165 PSI on, 200 PSI off) Air Line (For Remote Mount Filter Installation) Specifications: 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI Max. Working Pressure: 200 PSI Max. Amp Draw: 40 Amps Net Weight: 22.10 lbs.

Airaid 07-14 Toyota Tundra/Sequoia 4.6L/5.7L V8 CAD Intake System w/ Tube (Dry / Red Media)

Airaid

Airaid 07-14 Toyota Tundra/Sequoia 4.6L/5.7L V8 CAD Intake System w/ Tube (Dry / Red Media)

AIR511-213

$349.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

This Part Fits:

Year	Make	Model	Submodel
2008-2021	Toyota	Sequoia	Limited
2021	Toyota	Sequoia	Nightshade
2008-2021	Toyota	Sequoia	Platinum
2008-2021	Toyota	Sequoia	SR5
2020-2021	Toyota	Sequoia	TRD Pro
2018-2021	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

Airaid 10-20 Toyota 4Runner V6 4.0L / 10-14 FJ Cruiser V6 4.0L Performance Air Intake System

Airaid

Airaid 10-20 Toyota 4Runner V6 4.0L / 10-14 FJ Cruiser V6 4.0L Performance Air Intake System

AIR515-302

$349.99

Shipping calculated at checkout.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

This Part Fits:

Year	Make	Model	Submodel
2023	Toyota	4Runner	40th Anniversary Edition
2010-2023	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2010-2023	Toyota	4Runner	SR5
2018-2023	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2023	Toyota	4Runner	TRD Off-Road
2018-2023	Toyota	4Runner	TRD Off-Road Premium
2015-2023	Toyota	4Runner	TRD Pro
2022-2023	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2010-2014	Toyota	FJ Cruiser	Base

Airaid 18-20 Jeep Wrangler JL 2.0L L4 Performance Air Intake System

Airaid

Airaid 18-20 Jeep Wrangler JL 2.0L L4 Performance Air Intake System

AIR315-361

$349.99

Shipping calculated at checkout.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

This Part Fits:

Year	Make	Model	Submodel
2021	Jeep	Wrangler	80th Anniversary
2021,2023	Jeep	Wrangler	Freedom
2021	Jeep	Wrangler	Islander
2018-2023	Jeep	Wrangler	Rubicon
2018-2023	Jeep	Wrangler	Sport
2018-2023	Jeep	Wrangler	Sport S
2021	Jeep	Wrangler	Unlimited 80th Anniversary
2021,2023	Jeep	Wrangler	Unlimited Freedom
2021-2023	Jeep	Wrangler	Unlimited High Altitude
2021-2023	Jeep	Wrangler	Unlimited High Altitude 4xe
2021	Jeep	Wrangler	Unlimited Islander
2018-2023	Jeep	Wrangler	Unlimited Rubicon
2021-2023	Jeep	Wrangler	Unlimited Rubicon 4xe
2018-2021	Jeep	Wrangler	Unlimited Sahara
2021-2023	Jeep	Wrangler	Unlimited Sahara 4xe
2021-2023	Jeep	Wrangler	Unlimited Sahara Altitude
2018-2023	Jeep	Wrangler	Unlimited Sport
2021-2023	Jeep	Wrangler	Unlimited Sport Altitude
2018-2023	Jeep	Wrangler	Unlimited Sport S
2021-2023	Jeep	Wrangler	Unlimited Willys
2023	Jeep	Wrangler	Unlimited Willys 4xe
2021-2023	Jeep	Wrangler	Unlimited Willys Sport
2021-2023	Jeep	Wrangler	Willys
2021-2023	Jeep	Wrangler	Willys Sport

Airaid

Airaid U-Build-It - 3in Intake Tube

AIR100-300

$139.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid U-Build-It - 4.0in MAF Tube w/ 9700 Hitachi Plate

Airaid

Airaid U-Build-It - 4.0in MAF Tube w/ 9700 Hitachi Plate

AIR9641

$79.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid

Airaid U-Build-It - 5in Intake Tube

AIR100-500

$169.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid U-Build-It - GM A Body Kit w/ 4.0in Filter Adapter Passenger Side

Airaid

Airaid U-Build-It - GM A Body Kit w/ 4.0in Filter Adapter Passenger Side

AIR100-262

$279.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid U-Build-It - Universal 3.5in Master Kit I w/700-452 (6in) Filter

Airaid

Airaid U-Build-It - Universal 3.5in Master Kit I w/700-452 (6in) Filter

AIR101-352

$299.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid U-Build-It - Universal 4in Master Kit I w/700-470 (9in) Filter

Airaid

Airaid U-Build-It - Universal 4in Master Kit I w/700-470 (9in) Filter

AIR101-401

$349.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

Airaid U-Build-It - Universal 4in Master Kit II w/700-469 9in Filter

Airaid

Airaid U-Build-It - Universal 4in Master Kit II w/700-469 9in Filter

AIR101-400

$449.99

Shipping calculated at checkout.

Founded in 1997, AIRAID advanced the automotive aftermarket industry with the introduction of its AIRAID Intakes brand of air intake systems. Initially developed for light trucks and sport utility vehicles, the first AIRAID kits combined an open-element cotton gauze filter with an intake tube to produce an innovative, easy-to-install intake kit which dramatically increased air flow, horsepower and torque while improving overall engine performance. Within five years, explosive sales proved that Airaid's blend of technology and state-of-the-art materials were just what the performance parts market was missing. AIRAID Premium Filters were introduced in November 2002, securing Airaid's place as a leader in air management for both gasoline and diesel power plants. Airaid's product base now includes a wide variety of AIRAID Intake Systems, PowerAid Throttle Body Spacers and OEM replacement filters. Each AIRAID product line is the result of exhaustive research and development. Our in-house engineering team consists of both mechanical and industrial design engineers using the latest 3-D CAD modeling equipment to produce advanced designs that make more power right out of the box. A portable 3-D scanner and rapid prototyping machine allows AIRAID to test new products on our in-house Superflow flow bench and verify the unmatched fit, finish, and style that AIRAID customers demand. All products are then tested on our all-wheel-drive Mustang chassis dynamometer to produce real-world performance numbers. All AIRAID Premium Filters are produced in-house using only the finest materials available and highly specialized manufacturing equipment to ensure a level of quality control no other filter company can match. This is just one of many reasons why all of Airaid's filters are backed by our No Hassle Lifetime Warranty. All of Airaid's product lines are proudly manufactured in the USA.

AlphaRex

AlphaRex 03-09 Toyota 4Ru PRO-Series Proj Headlights Blk w/Activ Light/Seq Signal/DRL

ARX880375

$705.47

Shipping calculated at checkout.

We design our lights from inception, patent every component we've designed, and guarantee that our products are compliant with the SAE and DOT requirements.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5