***Please contact us for availability. 

25470 - SPC Upper Control Arms 

Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC's forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)

• Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC's arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.

 

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.

 

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

 

• On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

***Free Shipping Applies to the Lower 48 US States***

***Please contact us for availability. 

 

25480 - SPC Adjustable Upper Control Arms for FJ Cruiser, 03-Current 4Runner and 03+ Lexus GX470/GX460

Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC's forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

• Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC's arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.

 

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.

 

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

 

• On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

***Free Shipping Applies to the Lower 48 US States***

• Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  
• Fully re-buildable and re-valvable
• vZero shock fade in all terrains with full load
• Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
• Corrosion resistant (EDP Surface Protection)
• L45-8185-R (40mm-1.5'') Stock Load Leaf Springs 
• Dobinsons Shackle Polyurethane Bush Kit (PB45-1095K)
• UB59-453-3K U-Bolt Kit
• Direct, bolt-on replacement for easy fitment
• 2.2" Precision Honed Shock Body
• 50mm hi-flow CNC 6061 Billet alloy piston
• Heavy duty single piece lower leg
• Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
• High Quality Australian-made coil springs, heat treated, fully scragged, powder coated

 (MRA59-A220) - MRA59-A220

Fits: 

Toyota FJ Cruiser 2006-2010, Tacoma 4x4 2005-2019, 4Runner 2003-2009, Lexus GX470, Toyota Hilux 2005-2015

 

• 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
• 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
• 20 Stage Low Speed Compression - For creepy crawling and cornering
• 15 Stage Rebound - Control your coils, prevent bucking
• 50mm CNC Machined High Flow Billet Aluminium Race Piston
• 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
• Upgraded 3 Stage Sealing System
• TSUGAMITM CNC machined components for precise tolerances
  
• ParkerTM Braided High Pressure Hoses
• 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
• T6 6061 Height Adjustable Spring Seat
• Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance
• 60mm Full 6063 aluminum remote reservoir 
• Lightweight CNC Machined Low Friction floating piston
• High Quality O.E.M. Grade Natural Rubber Bushings
• Single Piece Lower Leg
• EDP Surface Protection
• Direct Bolt-On Design
• CNC TIG Precision Welded Body End Mounts
• Fully Rebuildable Design
• Single shock 

Looking for a lift kit system that will achieve optimal performance both on and off-road? The Eibach PRO-TRUCK-LIFT Stage 1 system was designed and engineered to do just that. This advanced suspension system is engineered to deliver maximum ride height without compromising the integrity of your factory bushings, ball joints, and other components.

This Part Fits:

Year	Make	Model	Submodel
2021-2022	Ford	Bronco	Base
2021-2022	Ford	Bronco	Big Bend
2021-2022	Ford	Bronco	Black Diamond
2021-2022	Ford	Bronco	Outer Banks

This is our entry level suspension system for the 2003-2009 Toyota 4Runner and 2007-2009 FJ Cruiser. The Stage 1 system works well in most on and off-road scenarios by significantly improving factory body roll and overall driving ability. ICON 2.5 Series front coilover shocks feature a vehicle-specific tune to give your Toyota 4Runner/FJ Cruiser great ride quality on or off-road, and they are adjustable from 0 to 3.5" of lift. Our rear 2.0 Aluminum Series shocks in this system are tuned to match the front 2.5 Series coilovers in every aspect, providing smooth and consistent damping performance front to rear. This system is finished off with a pair of 2" lift rear coil springs that have been engineered to further improve ride quality and handling.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2003-2009	Lexus	GX470	Base
2003-2009	Toyota	4Runner	Limited
2003-2009	Toyota	4Runner	Sport
2003-2009	Toyota	4Runner	SR5
2007-2009	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-UP models allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-UP Toyota Tacoma 4WD/PreRunner Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-UP models allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoir ICON 2.0 Aluminum Series rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-UP Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features tubular steel upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This system features billet aluminum upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2021	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2021	Toyota	Tacoma	SR
2016-2021	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2021	Toyota	Tacoma	TRD Off-Road
2015,2017-2021	Toyota	Tacoma	TRD Pro
2016-2021	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This new Centerline Steering Stabilizer shares the same great build features as our proven ICON 2.0 Aluminum Series shocks. These features include a clear anodized 6063 aluminum shock body for corrosion resistance and a 5/8” chrome plated hardened steel shaft for durability, premium 5WT shock oil that provides consistent damping characteristics across a wide operating temperature range, and a high temperature long wear seal pack that stands up to harsh conditions found both on and off-road. The Centerline Stabilizer mounts using CNC machined billet aluminum 1-3/8” tie rod clamps (1-5/8” clamps available) and the rod end features FK spherical bearings for precise and reliable operation.

This Part Fits:

Year	Make	Model	Submodel
2011	Jeep	Wrangler	70th Anniversary
2016	Jeep	Wrangler	75th Anniversary
2007-2017	Jeep	Wrangler	Rubicon
2007-2017	Jeep	Wrangler	Sahara
2010-2017	Jeep	Wrangler	Sport
2016	Jeep	Wrangler	Sport S
2011	Jeep	Wrangler	Unlimited 70th Anniversary
2016	Jeep	Wrangler	Unlimited 75th Anniversary
2007-2017	Jeep	Wrangler	Unlimited Rubicon
2007-2017	Jeep	Wrangler	Unlimited Sahara
2010-2017	Jeep	Wrangler	Unlimited Sport
2016	Jeep	Wrangler	Unlimited Sport S
2007-2010	Jeep	Wrangler	Unlimited X
2007-2010	Jeep	Wrangler	X
2018	Jeep	Wrangler JK	Rubicon
2018	Jeep	Wrangler JK	Sahara
2018	Jeep	Wrangler JK	Sport
2018	Jeep	Wrangler JK	Sport S
2018	Jeep	Wrangler JK	Unlimited Rubicon
2018	Jeep	Wrangler JK	Unlimited Sahara
2018	Jeep	Wrangler JK	Unlimited Sport
2018	Jeep	Wrangler JK	Unlimited Sport S

Take the performance of your 2005-2023 Toyota Tacoma to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your 2005-2023 Toyota Tacoma. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2010-2023	Lexus	GX460	Base
2023	Lexus	GX460	Black Line Edition
2014-2023	Lexus	GX460	Luxury
2010-2023	Lexus	GX460	Premium
2003-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition