Create some style and unique accents with our yellow powder coated D-shackles! This pair of 7/8-inch D-Ring Shackles from Rugged Ridge are rated at 13;500 lbs working load limit (WLL). Featuring a strong and sturdy construction; their natural high quality steel has been powder coated yellow for a unique colorful look. These D-Ring Shackles are well suited for connecting chains; cables; ropes; straps; and other fastenings in many different situations on the trail to adventure. Sold as set of two.

Create some style and unique accents with our yellow powder coated D-shackles! This pair of 3/4-inch D-Ring Shackles from Rugged Ridge are rated at 9;500 lbs working load limit (WLL). Featuring a strong and sturdy construction; their natural high quality steel has been powder coated yellow for a unique colorful look. These D-Ring Shackles are well suited for connecting chains; cables; ropes; straps; and other fastenings in many different situations on the trail to adventure. Sold as set of two.

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB1.25-A-BLK

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Black)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Earth Grey Powder Coat

-Part #SB1.25-A-GRY

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Grey)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB1.25-A-RED

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Red)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ 2.5" Shackle Block (Black):

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB2.5-BLACK
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block (Blue):

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Blue Powder Coat

-Part #SB2.5-BLUE
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block:

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB2.5-RED
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB2.5-A-BLK
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Black)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip

 

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Blue Powder Coat

-Part #SB2.5-A-BLU
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Blue)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip

 

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Grey Powder Coat

-Part #SB2.5-A-GRY
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Grey)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip

 

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB2.5-A-RED
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Grey)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip

 

A mounting panel that doubles as a platform for your rack. With many different mounting holes, this is ready to mount up whatever you want on your roof. This plate features mounting locations for RotoPax, NMO antennas, various tie-downs, in addition to multiple sliding tracks positioned throughout. These are 12" wide.

Powder-coated orders will ship standard with black oxide stainless hardware.

Includes:
(1) Adapt Plate
Mounting Hardware

An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment and vertical mounting holes to allow for a wide variety of awnings and tent setups.

Designed to work with smaller supported awnings such as Tepui, ARB, Roam, etc.  This bracket will not work with 270-degree awnings- check out our HD Awning Mounts instead!

Powder-coated orders will ship standard with black oxide stainless hardware.

Includes:

(2) Awning Mounts
Mounting Hardware for Crossbar Side

The heavy duty version of our classic awning mounts, designed for 270-degree awnings. Perfect for Batwing or other similar awnings. Will not work with a rooftop tent.

Powder-coated orders will ship standard with black oxide stainless hardware.

SOLD AS A SINGLE, NOT AS A PAIR. 

Includes:
(1) HD Awning Mount
Mounting Hardware for Crossbar Side

Designed for all Hi-Lifts and other similar trail jacks, this mount allows for mounting both along the rack and across it. Featuring aluminum knobs for easy removal, this mount is ready for your next trail run.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the main bolt and knob are only available in silver.

Includes:

(2) Hilift Brackets
(2) Aluminum Knobs
All required hardware for attachment to the rack

Tent Risers designed for use with hardshell rooftop tents. Most hardshell tents require an additional mounting bracket to lift them up off of the support bars of the rack system. We believe in keeping tents as low as possible and these mounts are designed to do just that. Select from two different height options to fit your application and tent needs.

*Mounts are sold in sets of 8 brackets.

Powder-coated orders will ship standard with black oxide stainless hardware.

Includes:
(8) Tent Mounts
All required hardware for attaching to the crossbar

This full-length aluminum roof rack, for the 2010-2022 5th Gen 4Runner, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 9 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle. 

Powder-coated orders will ship standard with black oxide stainless hardware. 

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2010-2022 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 95”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X 47”
LOAD RATING: 300 LBS. DYNAMIC  ||  700 LBS. STATIC
NUMBER OF CROSSBARS: 9
OVERALL WEIGHT: ~50 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:

(2) Sideplates
(9) Crossbars
(6) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

This full-length aluminum roof rack, for the 2005-2022 Double Cab Tacoma, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 7 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

 

THE SPECS

DESIGNED FOR: 2005-2022 TOYOTA TACOMA DOUBLE CAB 
PRODUCT DIMENSIONS: 63”X48-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X48”
LOAD RATING: 400 LBS. DYNAMIC  ||  700 LBS. STATIC
NUMBER OF CROSSBARS: 7
OVERALL WEIGHT: ~45 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(7) Crossbars
(6) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

This half-length aluminum roof rack, for the 2010-2022 5th Gen 4Runner, takes the adventure-proven full-length rack and makes it smaller for those that need less!  Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware. With a variety of different accessories and mounting options, this rack is modular and makes it easy to secure your gear. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

 

THE SPECS

DESIGNED FOR: 2010-2022 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 63.5”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X 47”
LOAD RATING: 200 LBS. DYNAMIC  ||  500 LBS. STATIC
NUMBER OF CROSSBARS: 5
OVERALL WEIGHT: ~35 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(1) Fairing with Edge Trim
(5) Crossbars
(4) Mounting Brackets
All required hardware for assembly

This full-length aluminum roof rack, for the 2003-2009 4th Gen 4Runner, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 10 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2003-2009 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 89”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X47”
LOAD RATING: 300 LBS. DYNAMIC  ||  600 LBS. STATIC
NUMBER OF CROSSBARS: 10
OVERALL WEIGHT: ~53 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(10) Crossbars
(4) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly