ACCESSORIES

New upgraded design!  

Note: Photo shows stainless steel. Product is now made using Aluminum. This product is laser cut aluminum comes unfinished, bare aluminum.

The new design allows you to mount a rocker switch next to the compressor and a manifold on the center bracket if you are running air lockers.

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Product ships in 5-7 days when in stock. Compressor sold separately.

Works only on 2010+ 4Runner (5th Gen) and works on 2020+ 4Runner's

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Hefty Fab logo patches. Fully embroidered. Loop side Velcro for attaching to your headliner! 3" x 2.75"

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

2016-2023 Tacoma

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

This product is laser cut aluminum comes unfinished, bare aluminum.

The Hefty Fabworks Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately) or similar compressors as well as space to mount a rocker switch. All mounting hardware is included. Product ships in 5-7 days when in stock. Compressor sold separately. 

The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. 

Works On

4th Gen 4Runner (03-09)

GX470

FJ Cruiser (05-09)

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

The Hefty Fabworks Body Mount Relocation kit is the ultimate solution for fitting larger tires on your 4Runner, Tacoma or GX. Unlike some other kits on the market, our relocation kit is designed to add strength to the frame and body mount while increasing the tire clearance. No more compromising the frame structure with poorly designed products, we provide a large frame plate that is welded into the frame and spreads the load across a large area, spanning across the original body mount areas and frame holes to eliminate frame cracking and structure issues associated with many relocations. 

Made in the USA!!

CNC laser cut and formed in house at Hefty Fabworks in Colorado Springs, CO

Kit includes: Drivers and Passenger side mounts, Two backer plates, Lower gusset plates, New Bushings and hardware to complete your install.

Installation:

Installation should be done by a professional and requires cutting, grinding and welding. The quality of the welding will determine the strength of the final product so pick your installer with this in mind. Average install time 5 hours.

Support the body of the vehicle with jacks or use a wedge between the body and frame to maintain the correct spacing. (don't forget to remove the wedge after the install is completed)

Pulling the interior floor carpet back, find the factory body mount bolt and remove the bolt from the vehicle. Remove the body mount.

Cut the factory body mount off the vehicle making sure not to cut into the frame, grind smooth.

Install the supplied frame plate: determine the location of the frame plate with the new body mount, start tacking the plate in at the rear portion. The plates are flat when they come to you, we recommend welding the section of the plate to the frame that sits flat, then while hot use a large hammer to for the plate to the frame towards the front of the vehicle and continue your weld as you go.

Install the body mount plate with the new hardware and tighten to compress the bushing. Tack weld the bracket into place then remove the bushing and hardware. Fully weld the mount into place, then weld in the lower brace. Wait for the brackets to cool then paint with a high quality paint before installing bushings.