Agency6.com

Billet Aluminum Freedom Top Locks for the 2018+ Jeep Wrangler (JL) and Jeep Gladiator (JT) - Orange

The A6™ L-Shaped Roof Locks are CNC machined from US certified Billet Aluminum. Designed to be compatible with the JL/JT Jeep models, these roof locks are an upgraded replacement option for any Jeep enthusiast.

All (6) L-Shaped roof locks are included as a complete set ready to install.

Finish: Anodized Orange

Proudly made in the U.S.A.

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

The Agency 6 License Plate Mount attaches to an Agency 6 Bronco Tire Delete to allow the use of a rear plate when running aftermarket bumpers that do not have plate provisions. Laser cut aluminum ensures this part stays rust free. Part includes stainless hardware for mounting.

Made in the USA.

Classic trucker cap style built with the Richardson quality you’ve come to expect.  Embroidered A6™ logo

Color: Black/Grey

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB1.25-A-BLK

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Black)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Earth Grey Powder Coat

-Part #SB1.25-A-GRY

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Grey)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ Shackle Block Assembly - 1.25" 

US Certified 6061 T6 CNC machined aluminum.
Lightweight design with a work load rating of 4,000 lbs* capable of standard recovery ops in off road situations.
Fits all standard 1.25 inch receivers and 5/8" screw pin shackle rings, pin diameter 1/2"

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB1.25-A-RED

Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Red)
• 1/2" D-Ring Shackle, 2T WLL
• 1/2" Hitch Pin w/Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Black Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-BLK

Includes:

• Shackle Block (Black)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Blue Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-BLU

Includes:

• Shackle Block (Blue)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Bronze Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-BRZ

Includes:

• Shackle Block (Bronze)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Earth Grey Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-GRY

Includes:

• Shackle Block (Earth Grey)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Orange Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-ORG

Includes:

• Shackle Block (Orange)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Red Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

-Part #SB2D-A-RED

Includes:

• Shackle Block (Red)
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ 2.5" Shackle Block (Black):

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB2.5-BLACK
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block (Blue):

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Blue Powder Coat

-Part #SB2.5-BLUE
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block:

US Certified 6061 T6 CNC machined aluminum.
Designed with style, the block has a work load rating of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*Do not exceed the lowest weight capacity of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB2.5-RED
Made in U.S.A - Limited Lifetime Warranty

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Black Powder Coat

-Part #SB2.5-A-BLK
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Black)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip

Agency 6™ 2.5" Shackle Block Assembly:

US Certified 6061 T6 CNC machined aluminum.
Innovative block design has a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.
Fits 2.5 inch receivers and 7/8" D-rings.

Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration.

*This assembly includes a shackle rated at 13,000 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

-Finish: Red Powder Coat

-Part #SB2.5-A-RED
Made in U.S.A - Limited Lifetime Warranty.

Includes:

• Shackle Block (Grey)
• 7/8" D-Ring Shackle, 6 1/2 ton WLL
• 5/8" Hitch Pin w/ Clip