Name: SPC Performance Ford Ranger/Bronco Front Lower Control Arm CAM Kit
Brand: SPC Performance
SKU: SPC86220
Price: 59.95 USD
Availability: InStock

SPC Performance

SPC Performance Ford Ranger/Bronco Front Lower Control Arm CAM Kit

SPC86220

$59.95

Shipping calculated at checkout.

Replace damaged or corroded factory adjusters on the new Ford Rangers and Broncos with this replacement cam kit from SPC. This kit is designed to replace the factory adjusters on the front lower control arm and provide the same adjustment range as the factory part it is replacing. One kit is needed per side of the vehicle, order two kits to service your complete front end. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2021-2024	Ford	Bronco	Badlands
2021-2023	Ford	Bronco	Base
2021-2024	Ford	Bronco	Big Bend
2021-2024	Ford	Bronco	Black Diamond
2022-2024	Ford	Bronco	Everglades
2021	Ford	Bronco	First Edition
2023-2024	Ford	Bronco	Heritage Edition
2023-2024	Ford	Bronco	Heritage Limited Edition
2021-2024	Ford	Bronco	Outer Banks
2022-2024	Ford	Bronco	Raptor
2021-2024	Ford	Bronco	Wildtrak
2019-2025	Ford	Ranger	Lariat
2024-2025	Ford	Ranger	Raptor
2019-2025	Ford	Ranger	XL
2019-2025	Ford	Ranger	XLT

SPC Performance

SPC Performance 04-20 Ford F-150 Lowered Front Adjustable Upper Control Arms

SPC25675

$815.16 $749.95 Save $65.21

Shipping calculated at checkout.

Restore drivability on lowered 2004-2020 Ford F150 trucks with SPC's control arms. These arms give +-2.0deg of camber and -1.0deg to +3.0deg of caster adjustability while also giving more ball joint articulation on trucks lowered up to 2.5". Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, these arms are designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80deg of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop and compression travel. Get your drivability and tracking back: When you lower your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you +-2.0deg of camber and -1.0deg to 3.0deg of caster, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 86250, adjustable cam nut/bracket or 86252, HD cam bolt assemblies. NOTE: These arms are designed specifically for trucks lowered up to 2.5". For lifted trucks check out part number 25680 instead. Patent NO. US 7,513,514

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Ford	Expedition	Eddie Bauer
2007-2010	Ford	Expedition	EL Eddie Bauer
2008-2017	Ford	Expedition	EL King Ranch
2007-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2011-2017	Ford	Expedition	EL XL
2007-2017	Ford	Expedition	EL XLT
2008	Ford	Expedition	Funkmaster Flex Edition
2008-2017	Ford	Expedition	King Ranch
2007-2017	Ford	Expedition	Limited
2015-2017	Ford	Expedition	Platinum
2016-2017	Ford	Expedition	SSV
2011-2017	Ford	Expedition	XL
2007-2017	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT
2004	Ford	F-150 Heritage	SVT Lightning
2004	Ford	F-150 Heritage	XL
2004	Ford	F-150 Heritage	XLT
2006-2008	Lincoln	Mark LT	Base
2008-2015	Lincoln	Navigator	Base
2008-2015	Lincoln	Navigator	L
2007	Lincoln	Navigator	L Luxury
2016-2017	Lincoln	Navigator	L Reserve
2016-2017	Lincoln	Navigator	L Select
2007	Lincoln	Navigator	L Ultimate
2007	Lincoln	Navigator	Luxury
2016-2017	Lincoln	Navigator	Reserve
2016-2017	Lincoln	Navigator	Select
2007	Lincoln	Navigator	Ultimate

SPC Performance

SPC Performance 8in. Steel Control Arm Adjusting Sleeve (3/4in. NPT Threads)

SPC92080

$20.42

Shipping calculated at checkout.

These 8" steel adjusting sleeves are the perfect fit with our pivot studs and ball joint plates. California Residents WARNING

ICON

ICON 2010+ Ford Raptor Billet Upper Control Arm Delta Joint Kit

ICO98562DJ

$1,659.95

Shipping calculated at checkout.

This ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new Ford Raptor with corrected front end geometry, adjustable camber and caster, and improved suspension component clearance. These are constructed of CNC machined 6061 billet aluminum merging light weight with high strength properties. Replacing the OE ball joint with the available ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 7/8” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect upgrade for the 2010-2020 Ford Raptor. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2017-2021	Ford	F-150	Raptor
2010-2014	Ford	F-150	SVT Raptor

ICON

ICON 21-23 Ford F150 Billet Front Upper Control Arms DJ Pro Kit

ICO98523DJ

$1,429.95

Shipping calculated at checkout.

ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected, and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

This Part Fits:

Year	Make	Model	Submodel
2021-2023	Ford	F-150	King Ranch
2021-2024	Ford	F-150	Lariat
2021-2023	Ford	F-150	Platinum
2021-2024	Ford	F-150	Police Responder
2021-2024	Ford	F-150	SSV
2024	Ford	F-150	STX
2021-2024	Ford	F-150	Tremor
2021-2024	Ford	F-150	XL
2021-2024	Ford	F-150	XLT

ICON

ICON 21-23 Ford F150 Tubular UCA DJ Pro Kit

ICO98522DJ

$879.95

Shipping calculated at checkout.

ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected, and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

This Part Fits:

Year	Make	Model	Submodel
2021-2023	Ford	F-150	King Ranch
2021-2024	Ford	F-150	Lariat
2021-2023	Ford	F-150	Platinum
2021-2024	Ford	F-150	Police Responder
2021-2024	Ford	F-150	SSV
2024	Ford	F-150	STX
2021-2024	Ford	F-150	Tremor
2021-2024	Ford	F-150	XL
2021-2024	Ford	F-150	XLT

ICON

ICON 2004+ Ford F-150 / 2014+ Ford Expedition Billet Upper Control Arm Delta Joint Kit

ICO98505DJ

$1,429.95

Shipping calculated at checkout.

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2014-2017	Ford	Expedition	EL King Ranch
2014-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2014-2017	Ford	Expedition	EL XL
2014-2017	Ford	Expedition	EL XLT
2014-2017,2020-2021	Ford	Expedition	King Ranch
2014-2021	Ford	Expedition	Limited
2020-2021	Ford	Expedition	Max King Ranch
2018-2021	Ford	Expedition	Max Limited
2018-2021	Ford	Expedition	Max Platinum
2018-2019	Ford	Expedition	Max XL
2015-2021	Ford	Expedition	Platinum
2016-2021	Ford	Expedition	SSV
2014-2019	Ford	Expedition	XL
2014-2021	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2017-2020	Ford	F-150	Raptor
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2010-2014	Ford	F-150	SVT Raptor
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT

ICON

ICON 04-20 Ford F-150 / 2014+ Ford Expedition Tubular Upper Control Arm Delta Joint Kit

ICO98500DJ

$879.95

Shipping calculated at checkout.

Take the performance of your 2004-2020 Ford F150 to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 series coilovers, this translates into superior performance and ride quality for your 2004-2020 Ford F150. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2014-2017	Ford	Expedition	EL King Ranch
2014-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2014-2017	Ford	Expedition	EL XL
2014-2017	Ford	Expedition	EL XLT
2014-2017,2020-2021	Ford	Expedition	King Ranch
2014-2021	Ford	Expedition	Limited
2020-2021	Ford	Expedition	Max King Ranch
2018-2021	Ford	Expedition	Max Limited
2018-2021	Ford	Expedition	Max Platinum
2018-2019	Ford	Expedition	Max XL
2015-2021	Ford	Expedition	Platinum
2016-2021	Ford	Expedition	SSV
2014-2019	Ford	Expedition	XL
2014-2021	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2017-2020	Ford	F-150	Raptor
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2010-2014	Ford	F-150	SVT Raptor
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT

ICON

ICON 2004+ Ford F-150 / 2010+ Ford Raptor Non-ICON Upper Control Arm 1in Retrofit Delta Joint Kit

ICO614564

$310.95

Shipping calculated at checkout.

Fitment verification is the duty of the installer! Failure to cycle suspension and check for bind issues may lead to component failure and/or injury. Professional installation required.

This Part Fits:

Year	Make	Model	Submodel
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2020	Ford	F-150	King Ranch
2004-2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2020	Ford	F-150	Limited
2009-2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2017-2020	Ford	F-150	Raptor
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2010-2014	Ford	F-150	SVT Raptor
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2020	Ford	F-150	XL
2004-2020	Ford	F-150	XLT

ICON

ICON 2008+ Toyota Land Cruiser 200 Billet Upper Control Arm Delta Joint Kit

ICO58570DJ

$1,549.95

Shipping calculated at checkout.

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2008-2011,2013-2021	Toyota	Land Cruiser	Base
2020-2021	Toyota	Land Cruiser	Heritage Edition

ICON

ICON 2024 Toyota Tacoma Billet Upper Control Arm w/ Delta Joint Pro - Gold Anodized

ICO58552GDJ

$1,479.95

Shipping calculated at checkout.

ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

This Part Fits:

Year	Make	Model	Submodel
2024	Lexus	GX550	Luxury
2024	Lexus	GX550	Luxury+
2024	Lexus	GX550	Overtrail
2024	Lexus	GX550	Overtrail+
2024	Lexus	GX550	Premium
2024	Lexus	GX550	Premium+
2024	Toyota	Land Cruiser	1958
2024	Toyota	Land Cruiser	Base
2024	Toyota	Land Cruiser	First Edition
2024	Toyota	Tacoma	Limited
2024	Toyota	Tacoma	SR
2024	Toyota	Tacoma	SR5
2024	Toyota	Tacoma	TRD Off-Road
2024	Toyota	Tacoma	TRD PreRunner
2024	Toyota	Tacoma	TRD Sport

ICON

ICON 2024+ Toyota Tacoma Billet UCA DJ Pro Kit

ICO58552DJ

$1,399.95

Shipping calculated at checkout.

ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

This Part Fits:

Year	Make	Model	Submodel
2024	Lexus	GX550	Luxury
2024	Lexus	GX550	Luxury+
2024	Lexus	GX550	Overtrail
2024	Lexus	GX550	Overtrail+
2024	Lexus	GX550	Premium
2024	Lexus	GX550	Premium+
2024	Toyota	Land Cruiser	1958
2024	Toyota	Land Cruiser	Base
2024	Toyota	Land Cruiser	First Edition
2024	Toyota	Tacoma	Limited
2024	Toyota	Tacoma	SR
2024	Toyota	Tacoma	SR5
2024	Toyota	Tacoma	TRD Off-Road
2024	Toyota	Tacoma	TRD PreRunner
2024	Toyota	Tacoma	TRD Sport

ICON

ICON 2024+ Toyota Tacoma Tubular UCA DJ Pro Kit

ICO58452DJ

$849.95

Shipping calculated at checkout.

ICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.

This Part Fits:

Year	Make	Model	Submodel
2024	Lexus	GX550	Luxury
2024	Lexus	GX550	Luxury+
2024	Lexus	GX550	Overtrail
2024	Lexus	GX550	Overtrail+
2024	Lexus	GX550	Premium
2024	Lexus	GX550	Premium+
2024	Toyota	Land Cruiser	1958
2024	Toyota	Land Cruiser	Base
2024	Toyota	Land Cruiser	First Edition
2024	Toyota	Tacoma	Limited
2024	Toyota	Tacoma	SR
2024	Toyota	Tacoma	SR5
2024	Toyota	Tacoma	TRD Off-Road
2024	Toyota	Tacoma	TRD PreRunner
2024	Toyota	Tacoma	TRD Sport

SPC Performance

SPC Performance 91-97 Toyota Landcruiser Rear Lower Control Arms (Pair)

SPC25960

$304.29 $279.95 Save $24.34

Shipping calculated at checkout.

This pair of rear lower control arms are direct replacements for weak or bent factory units on the 80 series Landcruiser. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise, with a xAxis sealed flex joint in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for off road use, these are the arms for you. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
1991-1997	Toyota	Land Cruiser	Base

SPC Performance

SPC Performance Toyota Lower Control Arms

SPC25955

$304.29 $279.95 Save $24.34

Shipping calculated at checkout.

This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of axle noise and xAxis joints in the opposite end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25455 front adjustable upper control arms! California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
1998-2007	Toyota	Land Cruiser	Base

SPC Performance

SPC Performance 04-17 Ford F-150 Front Adjustable Upper Control Arms

SPC25680

$815.16 $749.95 Save $65.21

Shipping calculated at checkout.

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring an upgraded greasable ball joint and rubber isolated xAxis bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80deg of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's patented ball joint design will get you +-2deg of caster and +-2deg of camber, beyond what the truck's lower slots provide, so you can put your alignment angles back to specification. Improve tire clearance: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Also consider SPC #86252 with upgraded bolts and adjustmentplates to lock in your alignment and prevent bolt slip on the lower control arm. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Ford	Expedition	Eddie Bauer
2007-2010	Ford	Expedition	EL Eddie Bauer
2008-2017	Ford	Expedition	EL King Ranch
2007-2017	Ford	Expedition	EL Limited
2015-2017	Ford	Expedition	EL Platinum
2016-2017	Ford	Expedition	EL SSV
2011-2017	Ford	Expedition	EL XL
2007-2017	Ford	Expedition	EL XLT
2008	Ford	Expedition	Funkmaster Flex Edition
2008-2017	Ford	Expedition	King Ranch
2007-2017	Ford	Expedition	Limited
2015-2017	Ford	Expedition	Platinum
2016-2017	Ford	Expedition	SSV
2011-2017	Ford	Expedition	XL
2007-2017	Ford	Expedition	XLT
2007-2008,2010-2014	Ford	F-150	FX2
2004-2014	Ford	F-150	FX4
2006-2008,2010-2012	Ford	F-150	Harley-Davidson Edition
2005-2018,2020	Ford	F-150	King Ranch
2004-2018,2020	Ford	F-150	Lariat
2011	Ford	F-150	Lariat Limited
2008,2013-2014,2016-2018,2020	Ford	F-150	Limited
2009-2018,2020	Ford	F-150	Platinum
2018-2020	Ford	F-150	Police Responder
2016-2020	Ford	F-150	SSV
2004-2014	Ford	F-150	STX
2008	Ford	F-150	THE 60TH ANNIVERSARY EDITION
2004-2018,2020	Ford	F-150	XL
2004-2018,2020	Ford	F-150	XLT
2004	Ford	F-150 Heritage	SVT Lightning
2004	Ford	F-150 Heritage	XL
2004	Ford	F-150 Heritage	XLT
2006-2008	Lincoln	Mark LT	Base
2008-2015	Lincoln	Navigator	Base
2008-2015	Lincoln	Navigator	L
2007	Lincoln	Navigator	L Luxury
2016-2017	Lincoln	Navigator	L Reserve
2016-2017	Lincoln	Navigator	L Select
2007	Lincoln	Navigator	L Ultimate
2007	Lincoln	Navigator	Luxury
2016-2017	Lincoln	Navigator	Reserve
2016-2017	Lincoln	Navigator	Select
2007	Lincoln	Navigator	Ultimate

ICON 05-23 Toyota Tacoma Lower Control Arm Kit

ICON

ICON 05-23 Toyota Tacoma Lower Control Arm Kit

ICO54300

$1,799.95

Shipping calculated at checkout.

The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Lower Control Arm Kit is designed to be the ultimate stock width replacement control arm upgrade. Their fully welded, boxed, CNC laser cut and brake formed steel plate construction is internally braced with multiple ribs to offer significantly improved strength over the stock Tacoma LCAs. Featuring a high ground clearance design, specially angled plates also allow the arms to easily slide over larger obstacles out on the trail. CNC machined forged steel ball joint housings maintain the highest possible ground clearance while also ensuring strength and appropriate CV boot clearance on 4WD Tacoma models. Rather than using traditional top mounted coilover mounting tabs, these LCAs utilize recessed coilover mounts, further increasing strength and provide race inspired styling. Their incorporated secondary shock mounting tabs tie seamlessly into the ICON S2 Secondary Shock System for a fully bolt-on installation of multiple secondary shock options to effectively double the shock damping ability of the front suspension and improve off-road performance. To make these arms as much at home on the street as they are on the trail, the lower ball joints are of a metal on metal and greaseable design to avoid the short service life and noises typically associated with uniballs while also being able to withstand the abuses of aggressive off-road use. The inner pivot bushings are bonded polyurethane to the outer sleeve and unbonded inner sleeve to minimize deflection and improve handling characteristics while allowing unhindered suspension movement though the entire travel range. Additionally, these specialty bushings do not require any greasing or other maintenance throughout their service life. With features like these, the ICON 2005-2023 Toyota Tacoma Lower Control Arm Kit would make an incredible addition to round out your Tacoma’s suspension system.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport

ICON 2019+ Ford Ranger Tubular Upper Control Arm Delta Joint Kit (Steel Knuckle Only)

ICON

ICON 2019+ Ford Ranger Tubular Upper Control Arm Delta Joint Kit (Steel Knuckle Only)

ICO98511DJ

$849.95

Shipping calculated at checkout.

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2020-2023	Ford	Ranger	Lariat
2020-2023	Ford	Ranger	XL
2020-2023	Ford	Ranger	XLT

ICON Ivd Uniball Upper Control Arm Service Kit

ICON

ICON Ivd Uniball Upper Control Arm Service Kit

ICO614500

$178.95

Shipping calculated at checkout.

ICON uniball service kit used to replace worn uniballs in all ICON tubular or billet uniball upper control arms.

ICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Billet Upper Control Arm Delta Joint Kit

ICON

ICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Billet Upper Control Arm Delta Joint Kit

ICO58551DJ

$1,429.95

Shipping calculated at checkout.

These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2010-2023	Lexus	GX460	Base
2023	Lexus	GX460	Black Line Edition
2014-2023	Lexus	GX460	Luxury
2010-2023	Lexus	GX460	Premium
2003-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

ICON 2007+ Toyota Tundra Tubular Upper Control Arm Delta Joint Kit

ICON

ICON 2007+ Toyota Tundra Tubular Upper Control Arm Delta Joint Kit

ICO58460DJ

$879.95

Shipping calculated at checkout.

Take the performance of your 2007-2021 Toyota Tundra or 2008-2022 Toyota Sequoia to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 or 3.0 series coilovers, this translates into superior performance and ride quality for your 2007-2021 Toyota Tundra. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro

ICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Tubular Upper Control Arm Delta Joint Kit

ICON

ICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Tubular Upper Control Arm Delta Joint Kit

ICO58451DJ

$849.95

Shipping calculated at checkout.

Take the performance of your Toyota 4Runner, FJ Cruiser, or Lexus GX to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your vehicle. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2010-2023	Lexus	GX460	Base
2023	Lexus	GX460	Black Line Edition
2014-2023	Lexus	GX460	Luxury
2010-2023	Lexus	GX460	Premium
2003-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2024	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2024	Toyota	4Runner	SR5
2018-2024	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2024	Toyota	4Runner	TRD Off-Road
2018-2024	Toyota	4Runner	TRD Off-Road Premium
2015-2024	Toyota	4Runner	TRD Pro
2022-2024	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

ICON 2005+ Toyota Tacoma Tubular Upper Control Arm Delta Joint Kit

ICON

ICON 2005+ Toyota Tacoma Tubular Upper Control Arm Delta Joint Kit

ICO58450DJ

$849.95

Shipping calculated at checkout.

Take the performance of your 2005-2023 Toyota Tacoma to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your 2005-2023 Toyota Tacoma. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2023	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2023	Toyota	Tacoma	SR
2016-2023	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2023	Toyota	Tacoma	Trail Special Edition
2016-2023	Toyota	Tacoma	TRD Off-Road
2015,2017-2023	Toyota	Tacoma	TRD Pro
2016-2023	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

ICON Tubular Upper Control Arm Billet Cap Set

ICON

ICON Tubular Upper Control Arm Billet Cap Set

ICO191011

$66.95

Shipping calculated at checkout.

ICON Vehicle Dynamics tubular upper control arms do an exceptional job of adding strength and performance to your truck while also correcting suspension geometry and reducing OE balljoint bind in lifted applications. The 1" PTFE-lined stainless steel uniball that can be found in ICON upper control arms is a high-quality component, but its location on the vehicle leaves it vulnerable to all of the elements you may drive through including dirt, water, sand, road salts, etc. Always looking to make good things even better, ICON engineers took the uniball cap concept featured in our Billet Upper Control Arms and arrived at the easy-to-install and affordable solution that is the ICON Uniball Cover Cap Kit. These 6061 billet aluminum caps were designed exclusively for ICON tubular upper control arms and feature extremely durable 3M neoprene adhesive rings that attach them to the uniball cup. While our caps don't make our arms invincible to normal wear, they do a great job of extending the service life of the uniball by keeping the elements out that are usually attributed to premature PTFE-liner failure. The kit includes one pair of caps and two pairs of adhesive rings so that uniballs may be serviced regularly. Whether you are an avid off-roader looking to keep your vehicle in top working order, or you just want to increase the cosmetics of your inner fender well, this is the perfect add-on for you.

SPC Performance Toyota Lower Control Arms

SPC Performance

SPC Performance Toyota Lower Control Arms

SPC25950

$293.44 $269.96 Save $23.48

Shipping calculated at checkout.

This pair of rear lower control arms are direct replacements for weak or bent factory units. Made of 3/16" wall DOM tube, they are more than 2x stronger than the OEM arms! They are equipped with a rubber bushing in one end for isolation of road noise and xAxis sealed flex joints in the other end for superior flexibility off road. Whether you are replacing damaged OE parts or upgrading for offroad use, these are the arms for you. Need articulation or alignment changes in the front? Check out the 25480 front adjustable upper control arms! California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2010-2023	Lexus	GX460	Base
2023	Lexus	GX460	Black Line Edition
2014-2023	Lexus	GX460	Luxury
2010-2023	Lexus	GX460	Premium
2003-2009	Lexus	GX470	Base
2023	Toyota	4Runner	40th Anniversary Edition
2003-2023	Toyota	4Runner	Limited
2020-2021	Toyota	4Runner	Nightshade
2003-2009	Toyota	4Runner	Sport
2003-2023	Toyota	4Runner	SR5
2018-2023	Toyota	4Runner	SR5 Premium
2010-2016,2021-2022	Toyota	4Runner	Trail
2017-2023	Toyota	4Runner	TRD Off-Road
2018-2023	Toyota	4Runner	TRD Off-Road Premium
2015-2023	Toyota	4Runner	TRD Pro
2022-2023	Toyota	4Runner	TRD Sport
2020-2021	Toyota	4Runner	Venture
2007-2014	Toyota	FJ Cruiser	Base
2008	Toyota	FJ Cruiser	Trail Teams Special Edition
2007	Toyota	FJ Cruiser	TRD Special Edition

SPC Performance TOYOTA TUNDRA ADJUSTABLE

SPC Performance

SPC Performance TOYOTA TUNDRA ADJUSTABLE

SPC25490

$815.16 $749.95 Save $65.21

Shipping calculated at checkout.

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING

This Part Fits:

Year	Make	Model	Submodel
2008-2022	Toyota	Sequoia	Limited
2021-2022	Toyota	Sequoia	Nightshade
2008-2022	Toyota	Sequoia	Platinum
2008-2022	Toyota	Sequoia	SR5
2020-2022	Toyota	Sequoia	TRD Pro
2018-2022	Toyota	Sequoia	TRD Sport
2014-2021	Toyota	Tundra	1794 Edition
2007-2013	Toyota	Tundra	Base
2007-2021	Toyota	Tundra	Limited
2021	Toyota	Tundra	Nightshade
2010-2021	Toyota	Tundra	Platinum
2014-2021	Toyota	Tundra	SR
2007-2011,2014-2021	Toyota	Tundra	SR5
2021	Toyota	Tundra	Trail
2015-2017,2019-2021	Toyota	Tundra	TRD Pro