The universal shims are designed to be installed on a variety of applications. Use these at the ends of the torque rods to chagne toe or thrust angels on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on the front and rear axles on Temsa Buses to change camber or caster angles. #35063 Thickness: 1/32" Qty: 100 #35064 Thickness: 1/16" Qty: 100 #35065 Thickness: 1/8" Qty: 100 Note: Ordering one Part Number gives youone hundred shims in a box.
These universal shims are designed to be installed on a variety of applications. Use these at the ends of the torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on the front and rear axles on Temsa Buses to change camber or caster angles. #35063 Thickness: 1/32" Qty: 100 #35064 Thickness: 1/16" Qty: 100 #35065 Thickness: 1/8" Qty: 100 Note: Ordering one Part Number gives youone hundred shims in a box.
SPC Performance 20-22 Ford Bronco Sport Rear EZ Cam Bolts (PR)
Dial in front camber +-1.75deg by replacing the strut bolt of many Ford and Lincoln SUV models. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change. SPC uses a hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. US Patent Nos. 8,544,861 * 8,469,375 * D783,393 * Additional Patents Pending China Patent No. ZL 201630012294.X California Residents WARNING
This shim kit will adjust the thrust angle on Hendrickson's walking beam? rear tandem axle suspension. Improve tire wear and handling by adjusting thrust angle from 0" to 3/8" in precise 1/32" increments.
These alignment shims are now available in a heavy-duty metal box to help you organize all of your shims. Packaged with a large variety of shims (listed below) and an organization chart inside the lid to make reordereing and organization of shims quick and easy. SET INCLUDES: 6-35001 Kenworth Airglide space 1/32", 6-35002 Kenworth Airglide space 1/16", 6-35003 Kenworth Airglide space 1/8", 6-35004 Kenworth Airglide space 1/4", 6-35005 Kenworth Airglide space 1/2", 6-35006 Kenworth Airglide space 3/4", 6-35007 Kenworth Airglide space 1", 2-35010 Peterbilt Air Leaf Shim 1/32", 4-35011 Peterbilt Air Leaf Shim 1/16", 6-35012 Peterbilt Air Leaf Shim 1/8", 2-35020 Freightliner FAS I Air Ride 1/32", 4-35021 Freightliner FAS I Air Ride 1/16", 6-35022 Freightliner FAS I Air Ride 1/8", 2-35030 Volvo/ White 4-Spring Susp 1/32", 4-35031 Volvo/White 4-Spring Susp 1/16", 6-35033 Volvo/White 4-Spring Susp 1/8", 2-35040 Navistar IHC Torque Arm 1/32", 4-35041 Navistar IHC Torque Arm 1/16", 6-35042 Navistar IHC Torque Arm 1/8", 2-35060 Freightliner Airliner Susp 1/32", 4-35061 Freightliner Airliner Susp 1/16", 6-35062 Freightliner Airliner Susp 1/8" , 2-35070 Freightliner Air Glide Susp 1/32", 4-35071 Freightliner Air Glide Susp 1/16", 6-35072 Freightliner Air Glide Susp1/8", 2-36010 Peter/KW Flex-Air Torque Arm 1/32", 4-36011 Peter/KW Flex-Air Torque Arm 1/16", 2-36012 Peter/KW Flex-Air Torque 1/8".
These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change to or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on the front and rear axles on Temsa Buses to change camber and caster angles. #35063 Thickness: 1/32" Qty: 100 #35064 Thickness: 1/16" Qty: 100 #35065 Thickness: 1/8" Qty: 100 Note: Ordering one Part Number gives you one hundred shims in a box.
These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson, and Navistar heavy duty tandem trucks and trailers. You can also use theseon the front and rear axles on Temsa Buses to change camber and caster angles. #35060 Thickness: 1/32" Qty: 6 #35061 Thickness: 1/16" Qty: 6 #35062 Thickness: 1/8" Qty: 6 Note: Ordering one Part Number gives you six shims in a box.
These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on the front and rear axles on Temsa Buses to change camber or caster angles. #35060 Thickness: 1/32" Qty: 6 #35061 Thicknes: 1/16" Qty: 6 #35062 Thickness: 1/8" Qty: 6 Note: Ordering one Part Number gives you six shims in a box. California Residents WARNING
These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem trucks and trailers. You can also use these on the front and rear axles on Temsa Buses to change camber and caster angles. #35060 Thickness: 1/32" Qty: 6 #35061 Thickness: 1/16" Qty:6 #35062 Thickness: 1/8" Qty: 6 Note: Ordering one Part Number gives you six shims in a box. California Residents WARNING
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box. California Residents WARNING
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box.
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used on the lateral link. Six shims per box. California Residents WARNING
Make camber changes in +.5° or +1.0° on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber issues.
Make camber changes in +.5deg or +1.0deg on many popular models by installing this shim between the hub and steering knuckle. A caliper shim is also included. These durable high-strength nylon shims provide a faster option for correcting negative camber issues. California Residents WARNING
This Part Fits:
Year
Make
Model
Submodel
2001-2003
Ford
Explorer
Eddie Bauer
2001-2003
Ford
Explorer
Limited
2001-2003
Ford
Explorer
Postal
2001
Ford
Explorer
XL Fleet
2001-2003
Ford
Explorer
XLS
2001-2003
Ford
Explorer
XLT
2005
Ford
Explorer Sport Trac
Adrenalin
2001
Ford
Explorer Sport Trac
Base
2002
Ford
Explorer Sport Trac
XL
2003-2005
Ford
Explorer Sport Trac
XLS
2003-2005
Ford
Explorer Sport Trac
XLT
2003-2005
Ford
Ranger
Edge
2005-2009
Ford
Ranger
FX4
2006-2011
Ford
Ranger
Sport
2004
Ford
Ranger
Tremor
2003-2011
Ford
Ranger
XL
2003-2011
Ford
Ranger
XLT
1984-1993
Jeep
Cherokee
Base
1991-1992
Jeep
Cherokee
Briarwood
1985-1988
Jeep
Cherokee
Chief
1996,1998-2001
Jeep
Cherokee
Classic
1993-1997
Jeep
Cherokee
Country
1985-1992
Jeep
Cherokee
Laredo
1987-1992,1998-2001
Jeep
Cherokee
Limited
1985-1990
Jeep
Cherokee
Pioneer
1994-2001
Jeep
Cherokee
SE
1989-2001
Jeep
Cherokee
Sport
1987-1992
Jeep
Comanche
Base
1987-1988
Jeep
Comanche
Chief
1986
Jeep
Comanche
Custom
1988-1992
Jeep
Comanche
Eliminator
1987-1988
Jeep
Comanche
Laredo
1987-1992
Jeep
Comanche
Pioneer
1986
Jeep
Comanche
X
1986
Jeep
Comanche
XLS
2006
Jeep
Commander
65th Anniversary Edition
2006-2007
Jeep
Commander
Base
2006-2010
Jeep
Commander
Limited
2007-2009
Jeep
Commander
Overland
2007-2010
Jeep
Commander
Sport
1998
Jeep
Grand Cherokee
5.9 Limited
2006
Jeep
Grand Cherokee
65th Anniversary Edition
1993
Jeep
Grand Cherokee
Base
1993-2010
Jeep
Grand Cherokee
Laredo
1993-2010
Jeep
Grand Cherokee
Limited
1995,1997
Jeep
Grand Cherokee
Orvis
2002-2004,2006-2009
Jeep
Grand Cherokee
Overland
1994-1995
Jeep
Grand Cherokee
SE
2004
Jeep
Grand Cherokee
Special Edition
2002
Jeep
Grand Cherokee
Sport
2006-2010
Jeep
Grand Cherokee
SRT8
1997-1998
Jeep
Grand Cherokee
TSi
2006
Jeep
Liberty
65th Anniversary Edition
2002-2007
Jeep
Liberty
Limited
2002-2006
Jeep
Liberty
Renegade
2005
Jeep
Liberty
Rocky Mountain Edition
2002-2007
Jeep
Liberty
Sport
1984-1987
Jeep
Wagoneer
Base
1984-1990
Jeep
Wagoneer
Limited
2006
Jeep
Wrangler
65th Anniversary Edition
2011
Jeep
Wrangler
70th Anniversary
2016
Jeep
Wrangler
75th Anniversary
1987-1993
Jeep
Wrangler
Base
1988-1992
Jeep
Wrangler
Islander
1987-1990
Jeep
Wrangler
Laredo
1991-1994
Jeep
Wrangler
Renegade
1995
Jeep
Wrangler
Rio Grande
2003-2018
Jeep
Wrangler
Rubicon
1988,1991-1994
Jeep
Wrangler
S
1988-1995,1997-2004,2007-2017
Jeep
Wrangler
Sahara
1994-1995,1997-2006
Jeep
Wrangler
SE
1987-1988,1997-2006,2010-2018
Jeep
Wrangler
Sport
2016,2018
Jeep
Wrangler
Sport S
2004-2006
Jeep
Wrangler
Unlimited
2011
Jeep
Wrangler
Unlimited 70th Anniversary
2016
Jeep
Wrangler
Unlimited 75th Anniversary
2018
Jeep
Wrangler
Unlimited Moab
2005-2018
Jeep
Wrangler
Unlimited Rubicon
2007-2018
Jeep
Wrangler
Unlimited Sahara
2010-2018
Jeep
Wrangler
Unlimited Sport
2016,2018
Jeep
Wrangler
Unlimited Sport S
2007-2010
Jeep
Wrangler
Unlimited X
2002-2010
Jeep
Wrangler
X
2018
Jeep
Wrangler JK
Rubicon
2018
Jeep
Wrangler JK
Sahara
2018
Jeep
Wrangler JK
Sport
2018
Jeep
Wrangler JK
Sport S
2018
Jeep
Wrangler JK
Unlimited Rubicon
2018
Jeep
Wrangler JK
Unlimited Sahara
2018
Jeep
Wrangler JK
Unlimited Sport
2018
Jeep
Wrangler JK
Unlimited Sport S
SPC Performance ADJ UCA TOYOTA TACOMA (Pair)
SPC25460
Regular price
$865.16
Sale price
$795.95
Save $69.21
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for Tacomas, PreRunners and 4-Runners. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen in many high travel suspensions. Get your drivability and tracking back:When you lift your truck you affect caster and camber. SPC's arm have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Do you need replacement cams for the lower control arm? Check out SPC p/n 25430, which will replace corroded cam bolt assemblies. * On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available. California Residents WARNING
This Part Fits:
Year
Make
Model
Submodel
1996-2001
Toyota
4Runner
Base
1996-2002
Toyota
4Runner
Limited
1996-2002
Toyota
4Runner
SR5
1995-2004
Toyota
Tacoma
Base
1998
Toyota
Tacoma
DLX
1998-2000
Toyota
Tacoma
Limited
1998-2004
Toyota
Tacoma
Pre Runner
2001-2004
Toyota
Tacoma
S-Runner
1995-2000
Toyota
Tacoma
SR5
SPC Performance 2022 Toyota Tundra Cam Bolt Kit (Pair)
Replace your OE adjusters with this cam bolt kit from SPC. The OE bolts on Toyota trucks and SUV's are frequently "fronzen" and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to +-1.5deg camber andcaster change. California Residents WARNING