ACCESSORIES

New upgraded design!  

Note: Photo shows stainless steel. Product is now made using Aluminum. This product is laser cut aluminum comes unfinished, bare aluminum.

The new design allows you to mount a rocker switch next to the compressor and a manifold on the center bracket if you are running air lockers.

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Product ships in 5-7 days when in stock. Compressor sold separately.

Works only on 2010+ 4Runner (5th Gen) and works on 2020+ 4Runner's

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

 

***If not in stock, this product is subject to the manufacturer's lead time.

Agency 6™ Billet Winch Shackle:

Field serviceable winch attachment made from US Certified 6061 T6 CNC machined aluminum with a 17-4 hardened stainless pin.
Lightweight design with a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.

Integrated cover minimizes abrasion and UV damage to synthetic line.

Stays looking great thanks to UV and abrasion resistant coating.

*Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, shackle, etc)

Finish: Powder Coat
Made in U.S.A. - Limited Lifetime Warranty.

***If not in stock, this product is subject to the manufacturer's lead time.

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Black Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

 

Includes:

• Shackle Block
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

***If not in stock, this product is subject to the manufacturer's lead time.

Pair of knobs to mount your Agency 6 shovel to our mounting devices.

All metal construction will not rust or degrade outdoors.

3/8-16 threads

***If not in stock, this product is subject to the manufacturer's lead time.

The Adventure Mini Shovel 2 is a lightweight multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc.  

Increased length makes for less effort while digging out tires, brush, etc. 

Hand welded construction, made in the USA.

Material: 6061-T6 Aluminum

Weight: 2.5 lbs

Length: 32 inches

Finish: Textured Power Coated

***If not in stock, this product is subject to the manufacturer's lead time.

Agency 6 billet grab handles mount easily to a variety of places to make accessing your roof rack or getting in and out less treacherous. Billet aluminum will last a lifetime and the durable powdercoat can bake in the sun or chill in the snow without discoloring.

Please see attached drawing for mounting and spacing specs.

Set includes 2 handles and stainless 1/4-20 hardware for mounting.

Part Number: WAR89970

Whether you're a seasoned overlander or a newbie off-roader ? we can all reap the benefits of an onboard air compressor. This invaluable adventure upgrade can easily be installed under the hood of your Ford Bronco with the ARB Compressor Engine Bay Mount that has been validated by Ford Engineers. The unique mounting solution provides enough space to cater a single or twin compressor, switch, and manifold. The mount is 100% bolt-on and uses factory mounting points with support for both 2.3L and 2.7L engines.

This Part Fits:

Year	Make	Model	Submodel
2021-2023	Ford	Bronco	Badlands
2021-2023	Ford	Bronco	Base
2021-2023	Ford	Bronco	Big Bend
2021-2023	Ford	Bronco	Black Diamond
2021	Ford	Bronco	First Edition
2023	Ford	Bronco	Heritage Edition
2023	Ford	Bronco	Heritage Limited Edition
2021-2023	Ford	Bronco	Outer Banks
2021-2023	Ford	Bronco	Wildtrak

Few 4x4 accessories offer as many advantages to off-roaders as readily available on-board air. Considered by 4x4 owners around the world to be a staple accessory for off road travel, an ARB 4x4 Air Compressor provides an immediate source of compressed air anywhere a 12 or 24 volt power source is available. Tires perform best when they are set at a pressure that is appropriate for the terrain. While highway use calls for a relatively high pressure rate, lowering your air pressure will dramatically improve your 4x4s traction in a range of off road environments. Compressed air allows you the freedom to adjust the tire inflation level of your truck to suit the conditions. An equally beneficial feature of on-board air is the ability to re-inflate tires that have been repaired - it is not unusual to get several punctures in one day when traveling in extreme off-road conditions. In this environment, the value of owning an air compressor is priceless. When coupled with good quality tire repair equipment, an ARB air compressor provides the off road traveler with independence and peace of mind. ARB 4x4 Air Compressors are individually leak tested, current draw tested and flow tested under load at the factory before packaging and come with a comprehensive 2 year warranty. And ARBs after-sales service is second to none with many of the compressor components readily available and easily sourced. Along with ARB Air Compressors, ARB also offers a range of tire accessories including tire deflators, tire inflators and tire repair kit. A perfect pairing with ARB Air Compressors.

ARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered tools, and also to suit the actuation and control needs of the ARB Air Locker, and the harsh and demanding environment of the ARB Air Locker user.

***If not in stock, this product is subject to the manufacturer's lead time.

The Universal Mount Device (UMD) is a billet aluminum universal mounting bracket that can mount on multiple applications such as, round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road equipment in any desired location on flat surfaces, roll bars or other tubing used on the vehicle. 

*Minimum diameter tubing for MMD mounting is 1.5"

Designed to work with Agency 6™ Shovels 

- Material: 6061-T6 Billet Aluminum

- Powder Coat - Stays looking great thanks to UV and abrasion resistant coating

- Made in USA

*Includes: x2 Clamp assemblies - x4 bolts 

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

***If not in stock, this product is subject to the manufacturer's lead time.

The SSM (Surface Shovel Mount) is a billet aluminum mounting bracket designed to  mount onto flat applications, such as Roof racks, carrier boxes, and MOLLE panels. Dual mounting angles allow for better clearance when mounting near roof rails or other obstacles. Threaded holes in the rear allow you to mount this directly onto the surface with 1/4-20 hardware (included). Mounting holes are spaced 6" apart.

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- Powder coat Finish
- Stainless mounting hardware included

 
- Made in the USA

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Adventure Mini Shovel / Mount combo is a convenient, complete shovel and mount package. 

The Adventure Mini Shovel (AMS-1) is a lightweight, hand-welded, multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc. Shovel includes built-in mounting holes (6" apart).

- Material: 6061-T6 Aluminum
- Weight: 1.75 lbs
- Length: 23 inches
- Finish: Power Coated Textured

The UMD (Universal Mount Device) is a billet aluminum universal mounting bracket that can mount on multiple applications, such as round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road tools or accessories in any desired location on vehicles or equipment.

*Minimum diameter tubing for UMD mounting is 1.5"

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- BPowder coat Finish

- Made in the USA

*Shovel/Mount Combo includes: x1 Adventure Mini Shovel - x2 UMD - x4 bolts - x2 Shovel Knobs

***If not in stock, this product is subject to the manufacturer's lead time.

Tired of everything rolling around back there? Want to keep important equipment at the ready? Add organization to your Bronco with the Agency 6  GRIDS panel.  This rear storage solution gives you vertical real estate for mounting a variety of accessories. MOLLE pattern cutouts allow for a range of camping and off-road components to be securely strapped directly to the panels.  Slots on the perimeter are ideal for mounting lights, or as additional strap points. Panel bolts through the plastic directly into existing metal structure utilizing machined aluminum adapters. 

Laser-cut panels are strong, lightweight and feature a durable black powder coated finish. All parts are made in house with US sourced materials.

This kit works on hard-top models and non-retractable soft-top models

Fitment: Ford Bronco (2020-) 

Includes all hardware for install.

***If not in stock, this product is subject to the manufacturer's lead time.

Tired of everything rolling around back there? Want to keep important equipment at the ready? Add organization to your 4Runner with the Agency 6 4Runner GRIDS panel.  This rear storage solution gives you vertical real estate for mounting a variety of accessories. MOLLE pattern cutouts allow for a range of camping and off-road components to be securely strapped directly to the panels.  Slots on the perimeter are ideal for mounting lights, or as additional strap points. Panel bolts through the plastic directly into existing metal structure utilizing machined aluminum adapters. 

Laser-cut panels are strong, lightweight and feature a durable black powder coated finish. All parts are made in house with US sourced materials.

This kit works with both 2nd and 3rd-row equipped models

Fitment: 5th Gen Toyota 4Runner (2010-2020) 

Includes all hardware for install.

For instructions CLICK HERE

*This item requires drilling of your plastic panel. 

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.5" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.0" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Fits both the single and dual ARB Compressor. Comes powder coated black. Product ships in 5-7 days when in stock. Compressor sold separately.

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

 

The Recovery Utility Tool (RUT) is a fully functional collapsible Military Style shovel with an easy grip and light handle with a carbon steel blade that is heat-treated for high strength and features double serrated edges for easy digging or cutting. The heavy-duty black powder coated body is 23-1/4" when open and folds to a mere 9". It can be stowed easily. Durable storage case included. It's rugged enough for the toughest of jobs. Never go on the trail without it.

The Smittybilt snatch block is rated for 17,600lbs. capacity for self-recovery winches. Look to Smittybilt for snatch blocks to help guide you out of any situation.

• Not Vehicle Specific
• Black finish
• Universal
• Up to 17,600 lb. maximum capacity
• Greasable fitting for continued smooth operation
• Doubles the pulling power of your winch
• Works with 7/32-3/8" cables
• Helps with angled pulls
• Easy installation
• 5 year limited warranty

DESCRIPTION

Smittybilts D-Ring Shackles are the perfect vehicle recovery rigging point. These universal fit shackles will work perfectly with your aftermarket bumper. Smittybilts D-Rings will provide you with years of reliable service out on the trail.

When you take your truck off the beaten path, you're bound to find some struggling vehicles stranded in rough spots. You know your truck has the power to get the job done. Now you just need the right winch accessories to pull them out. A basic tow cable won't do in these situations. This essential part is the perfect rigging point for the toughest retrieval jobs.

What Makes it so Special?

If you think all recovery accessories are the same, you'd better think again. You'll see for yourself what sets the Smittybilt 3/4 inch red D-ring shackles apart from other products. This high-quality, ultra-durable part is equipped to handle nearly 5 tons of work. The steel construction should give you the assurance you need that this product will last year after year. It has universal fitment to shackles and is compatible with just about any bumper you could imagine. Even in extreme weather, this D-ring won't corrode.

• Not Vehicle Specific
• Gloss red finish
• 3/4 inch shackle
• 4.75 ton rating
• Heavy duty, forged steel construction
• Corrosion resistant
• Easy, no-drill installation
• Also available in zinc or gloss black
• Sold individually