These upper control arms feature ICON's patent pending Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2022	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2022	Toyota	Tacoma	SR
2016-2022	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2022	Toyota	Tacoma	TRD Off-Road
2015,2017-2022	Toyota	Tacoma	TRD Pro
2016-2022	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1.5 inches of lift after installation. Just remove the factory overload and say good bye to that rough factory ride.

This Part Fits:

Year	Make	Model	Submodel
1995-2015	Toyota	Tacoma	Base
1998	Toyota	Tacoma	DLX
1998-2000,2016-2022	Toyota	Tacoma	Limited
1998-2015	Toyota	Tacoma	Pre Runner
2001-2004	Toyota	Tacoma	S-Runner
2016-2022	Toyota	Tacoma	SR
1995-2000,2016-2022	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2022	Toyota	Tacoma	TRD Off-Road
2015,2017-2022	Toyota	Tacoma	TRD Pro
2016-2022	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner
2000-2006	Toyota	Tundra	Base
2000-2006	Toyota	Tundra	Limited
2000-2006	Toyota	Tundra	SR5

To take advantage of the additional travel that the RXT Rear Suspension System offers, ICON engineers had to scrap the OE leaf springs and develop a replacement that addressed issues found in the R&D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Tacoma setup imaginable. Features like tip inserts and leaf separators reduce friction and increase ride comfort, while a military wrapped front eyelet improves the durability and strength of the leaf spring. To increase the ride quality of the truck and gain additional droop travel, the spring rate has been lowered slightly. While many Tacoma owners will embrace this, there are those who have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires and parts or other additions. Understanding this, the leaf pack was designed with an additional leaf (included with kit) that can be exchanged or added to the pack yielding an additional 10% or 20% spring rate that will handle more "outfitted" vehicles.

This Part Fits:

Year	Make	Model	Submodel
2005-2015	Toyota	Tacoma	Base
2016-2022	Toyota	Tacoma	Limited
2005-2015	Toyota	Tacoma	Pre Runner
2016-2022	Toyota	Tacoma	SR
2016-2022	Toyota	Tacoma	SR5
2021	Toyota	Tacoma	Trail
2016-2022	Toyota	Tacoma	TRD Off-Road
2015,2017-2022	Toyota	Tacoma	TRD Pro
2016-2022	Toyota	Tacoma	TRD Sport
2005-2013	Toyota	Tacoma	X-Runner

ALL RACKS SHIP FOR ONE FLAT RATE OF $65 ANYWHERE IN THE LOWER 48.
IN STOCK AND SHIPPING WITHIN 24 HOURS!

Bravo Tacoma Double Cab Roof Rack (2005-2022)

Designed and manufactured for overlanding at a price that is affordable. This is the rack you want for your Tacoma. A user friendly system with machined cut outs and placement points will easily allow you to customize the placement of all of your gear. With a sleek black powder coated finish it will look great on your Tacoma!

Specifications

• WORKS WITH OEM ANTENNA AND SUNROOF.
• NOT COMPATIBLE WITH OEM DESERT AIR INTAKE OR AIRAID SNORKEL
• Dimensions: 50" Wide x 65" Long
• Height: Adds around 2.5" to your vehicle.
• Weight: Around 50 lbs.

Included

• (6) Extruded Aluminum Load Bars. Standard Black.
• (4) Steel Feet that easily mount to OEM Mounting Holes
• (2) Integrated grooveARMOR Sides
• (1) Front Wind Screen (preferred cutout option)
• All required fasteners, washers, lock nuts, and spacers are included in the kit

Not Included

• Grab Handles, Lighting, ScenePOD, quickWIRE, as well as anything not listed above.

ALL RACKS SHIP FOR ONE FLAT RATE OF $65 ANYWHERE IN THE LOWER 48.
CURRENT LEAD TIME IS LESS THAN 2 WEEKS FOR ALL HEIGHTS. 

Tacoma TRUSS Bed Rack (2005-2022)

Fully built with aluminum our bed rack is strong, lightweight, and fits perfectly on your Tacoma! Offered in a Short, Mid or Full height option with a one size fits all design we cover both short and long bed owners. Gain the ability to mount a roof top tent and any other large items upTOP!

All upTOP TRUSS systems come complete with load bearing armor plates for both sides that are pre-drilled in the perfect locations for mounting all your adventure and recovery gear. You'll find provisions for Maxtrax, Rotopax, Quickfists, and Waterports. There are enough slots to allow you to attach just about anything else you can drum up a reason to take into the great unknown!  

iKAMPERs require specific brackets, please call for details.

Specifications

• One size fits all design for long and short bed Tacomas.
• Length is around 50"
• Load bar width is 50"
• Weight averages around 55 lbs.

TRUSS HEIGHT  (Measured from bed rail to top of load bar)

• Short Height = 6" (Unable to mount MaxTrax; mount not included)
• Mid Height = 11.5"
• Full Height = 19"

THIS TRUSS IS NOT COMPATIBLE WITH TONNEAUS, SOFTTOP OR BESTOP, OR ANY OTHER BED COVERS. PLEASE SEE OTHER MODELS FOR FITMENTS WITH COVERS. ONE SIZE FITS ALL. WE DO NOT HAVE A LONG AND SHORT BED VERSION.

Included

• (6) TRUSS Legs
• (6) Steel Mounting Feet
• (4) Side Armor Plates
• (3) 2" X 2" Load Bars
• (1) All required fasteners, washers, lock nuts, and spacers are included in the kit.

Not Included
- RETRAX bed cover, upTOP eX Overland Rack, Lighting, Maxtrax Mounts as well as anything not listed above.

Note: The TRUSS systems sit on your existing plastic bed side rail caps and bolt into the factory cargo slides located inside your Tacoma bed. All hardware, washers, and threaded inserts are included with the kit.

Hefty Fabworks Flat Bill Flexfit Hat

Sizes:

M/L: 6 1/8" - 7 1/4"

L/XL: 7 1/4" - 7 5/8"

Embroidered with Hefty Fabworks HF Logo

210 Fitted Flexfit Flat Bill
83% Acrylic
15% Wool
2% Spandex

Hefty Fabworks Flexfit Mesh Hat Black

One size fits all

Embroidered with Hefty Fabworks HF Logo

55% Polyester
43% Cotton
2% Spandex

***If not in stock, this product is subject to the manufacturer's lead time.

The Universal Mount Device (UMD) is a billet aluminum universal mounting bracket that can mount on multiple applications such as, round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road equipment in any desired location on flat surfaces, roll bars or other tubing used on the vehicle. 

*Minimum diameter tubing for MMD mounting is 1.5"

Designed to work with Agency 6™ Shovels 

- Material: 6061-T6 Billet Aluminum

- Powder Coat - Stays looking great thanks to UV and abrasion resistant coating

- Made in USA

*Includes: x2 Clamp assemblies - x4 bolts 

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

***If not in stock, this product is subject to the manufacturer's lead time.

The SSM (Surface Shovel Mount) is a billet aluminum mounting bracket designed to  mount onto flat applications, such as Roof racks, carrier boxes, and MOLLE panels. Dual mounting angles allow for better clearance when mounting near roof rails or other obstacles. Threaded holes in the rear allow you to mount this directly onto the surface with 1/4-20 hardware (included). Mounting holes are spaced 6" apart.

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- Powder coat Finish
- Stainless mounting hardware included

 
- Made in the USA

Lightbar-specific mounting brackets that are designed to position your light bar at the perfect height for the front of your rack. Cut and bent from 3/16” aluminum (Onx6 are 1/4"), these brackets are designed to position your light bar so that the front wind fairing acts as the perfect cutoff line in front of the truck. Eliminating the blinding effects of hood glare.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the black oxide hardware is only for the bolts that go into the crossbar. The bolts that go into the lightbar are stainless steel.

Includes:
(2) Lightbar Brackets
Stainless Replacement Lightbar Hardware (ExtremeLED)
All required hardware for assembly

These handle light brackets are designed for seamless sidelight integration of Baja Designs Rock Lights, right into the handle on your rack system. You no longer have to worry about having your expensive lights ripped off by a stray tree limb or adding any additional holes into the side plate of your rack system.

SOLD IN PAIRS (2)

NOTE: Baja Design Rock Lights do not include a harness.

Includes:
(2) Handle Light Brackets
Mounting Hardware

The heavy duty version of our classic awning mounts, designed for 270-degree awnings. Perfect for Batwing or other similar awnings. Will not work with a rooftop tent.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

SOLD AS A SINGLE, NOT AS A PAIR. 

Includes:
(1) HD Awning Mount
Mounting Hardware for Crossbar Side

Designed for all Hi-Lifts and other similar trail jacks, this mount allows for mounting both along the rack and across it. Featuring aluminum knobs for easy removal, this mount is ready for your next trail run.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the main bolt and knob are only available in silver.

Includes:

(2) Hilift Brackets
(2) Aluminum Knobs
All required hardware for attachment to the rack

Tent Risers designed for use with hardshell rooftop tents. Most hardshell tents require an additional mounting bracket to lift them up off of the support bars of the rack system. We believe in keeping tents as low as possible and these mounts are designed to do just that. Select from two different height options to fit your application and tent needs.

*Mounts are sold in sets of 8 brackets.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Includes:
(8) Tent Mounts
All required hardware for attaching to the crossbar

An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment and vertical mounting holes to allow for a wide variety of awnings and tent setups.

Designed to work with smaller supported awnings such as Tepui, ARB, Roam, etc.  This bracket will not work with 270-degree awnings- check out our HD Awning Mounts instead!

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Includes:

(2) Awning Mounts
Mounting Hardware for Crossbar Side

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Adventure Mini Shovel / Mount combo is a convenient, complete shovel and mount package. 

The Adventure Mini Shovel (AMS-1) is a lightweight, hand-welded, multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc. Shovel includes built-in mounting holes (6" apart).

- Material: 6061-T6 Aluminum
- Weight: 1.75 lbs
- Length: 23 inches
- Finish: Power Coated Textured

The UMD (Universal Mount Device) is a billet aluminum universal mounting bracket that can mount on multiple applications, such as round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road tools or accessories in any desired location on vehicles or equipment.

*Minimum diameter tubing for UMD mounting is 1.5"

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- BPowder coat Finish

- Made in the USA

*Shovel/Mount Combo includes: x1 Adventure Mini Shovel - x2 UMD - x4 bolts - x2 Shovel Knobs

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.5" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

***If not in stock, this product is subject to the manufacturer's lead time.

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.0" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

A mounting panel that doubles as a platform for your rack. With many different mounting holes, this is ready to mount up whatever you want on your roof. This plate features mounting locations for RotoPax, NMO antennas, various tie-downs, in addition to multiple sliding tracks positioned throughout. These are 12" wide.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Includes:
(1) Adapt Plate
Mounting Hardware

This full-length aluminum roof rack, for the 2005-2022 Double Cab Tacoma, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 7 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

 

THE SPECS

DESIGNED FOR: 2005-2022 TOYOTA TACOMA DOUBLE CAB 
PRODUCT DIMENSIONS: 63”X48-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X48”
LOAD RATING: 400 LBS. DYNAMIC  ||  700 LBS. STATIC
NUMBER OF CROSSBARS: 7
OVERALL WEIGHT: ~45 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(7) Crossbars
(6) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

The Hefty Fabworks ARB Compressor bracket is designed to bolt into the engine bay and provide a solid mounting system for the ARB Compressor (sold separately). All mounting hardware is included. The bracket is made of 1/8" Aluminum for a lifetime of corrosion resistance. Fits both the single and dual ARB Compressor. Comes powder coated black. Product ships in 5-7 days when in stock. Compressor sold separately.

***Does NOT work on TRD Sport trim levels. Please verify with installation instructions HERE that there is nothing that interferes with mounting the bracket on the passenger side firewall.

Mounting location: Passenger Side firewall behind the air box

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

 

***Please contact us for availability. 

25470 - SPC Upper Control Arms 

Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC's forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)

• Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC's arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.

 

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.

 

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

 

• On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

***Free Shipping Applies to the Lower 48 US States***

***Please contact us for availability. 

96504 - Total Chaos Uniball Upper Control Arms

• 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
• CNC machined slug adapters press into the spindle and convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
• TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
• Custom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel. The lower hi-misalignment spacer registers into the slug adapter for maximum strength.
• Upper control arms combined with extended length coil over shocks will allow for up to 1" of additional wheel travel.
• Urethane bushings reduce bushing deflection compared to stock rubber bushings.
• Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
• 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
• Complete grade 8 hardware kit is included.
• Fits all 6 wheel lug: '05+ Tacoma, '03+ 4Runner, & '07-14 FJ Cruiser, 03+GX470/GX460

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on transmission skid and additional support on front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2016+ Toyota Tacoma Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

***Note: Transfer Case Skid requires one hole to be drilled into frame. Gas tank skid requires OEM TRD brackets and hardware to mount.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, Transfer Case skid requires one hole to be drilled into the frame.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 90 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

---

Package includes Radiator/Engine, Transmission, and Transfer Case. Full set reduces the shipping cost of individual skids.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments, an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022

***Estimated production lead time is 8-10 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2016+ Toyota Tacoma Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

***Note: Transfer Case Skid requires one hole to be drilled into frame.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, Transfer Case requires one hole to be drilled into the frame.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 11 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 8-10 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle.

The Hefty Fabworks 2016+ Toyota Tacoma Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt-on, no modifications

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 23 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 10-12 weeks

Designed for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on the front skid. Works with or without a differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2016+ Toyota Tacoma Radiator/Engine Skid is the ultimate front-end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your Tacoma.

***Note: Fits Access cab and Double cab 4×4 models only. Does not fit 2wd models. 

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Front access panel is fully backed and welded to eliminate breaking during impact.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

---

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

---

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 10-12 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021