TACOMA 2016+

***Estimated production lead time is 16-20 weeks

***2020 and up 4Runner Models with TSS Sensor will not work with this bumper.

2010+ 4Runner/2016+ Tacoma Tube Winch Bumper - Prerunner Hoop

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA virgin steel, the 3/16" thick mounting plate, 3/8" thick uprights, and sleeved integrated recovery points make this a very strong and lighter weight bumper vs most steel bumpers on the market for your 4Runner or Tacoma. Yes you can run this bumper without suspension modifications but we recommend 650lb springs for your front suspension when running a winch. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 5th Gen 4Runner and 3rd Gen Tacoma. Please select vehicle model in options list.

Bumpers come raw steel ready to be coated by you.

Winch capable up to 10,000 lb with non integrated solenoid. May require relocation of control box to fit winch.

This bumper requires trimming the factory bumper cover.

Mounting tabs for 3 lights on top bar and additional mounting locations for aftermarket fog lights in the bumper wings. Most 3 1/2" fog lights or Pods will fit. Fits up to a 30” light bar (may require a U cradle or other mounting bracket to work), two Baja Designs LP9's, or three Baja Design LP6's or similar.

Bolt on application

***Optional Cooler Line Skids: Protects the cooler lines. 5th Gen 4Runner ONLY.

Items Included:

(1) Bare Front Tube Bumper

(1) Aluminum Filler Panel

(1) Frame Mount Set

(2) 12mm x 35mm Bolts

(14) 1.5" Fender Washers

(6) 0.5" Grade 8 Bolts

(6) Lock Washers

(6) 0.5" Nuts

(8) 3/8" Fender Washers

(8) 10mm x 45mm Bolts

Weight: 98 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Shipping Information:

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping to AK, HI, or outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location and customer is responsible for any additional shipping costs. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Bumpers are built to order. This product will be built in batches and released once completed. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (minor cutting of factory bumper cover)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

 Fitment years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

***Estimated production lead time is 16-20 weeks

***NOTE: Low Hoop will not work on Tacoma's with TRD PRO grille with TSS as it interferes with the sensor. Standard grilles are fine.

***2020 and up 4Runner Models with TSS Sensor will not work with this bumper.

2010+ 4Runner/2016+ Tacoma Tube Winch Bumper - Low Hoop

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA virgin steel, the 3/16" thick mounting plate, 3/8" thick uprights, and sleeved integrated recovery points make this a very strong and lighter weight bumper vs most steel bumpers on the market for your 4Runner or Tacoma. Yes you can run this bumper without suspension modifications but we recommend 650lb springs for your front suspension when running a winch. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Available for all models and years for the 5th Gen 4Runner and 3rd Gen Tacoma. Please select vehicle model in options list.

Bumpers come raw steel ready to be coated by you.

Winch capable up to 10,000 lb with non integrated solenoid. May require relocation of control box to fit winch.

This bumper requires trimming the factory bumper cover.

Mounting tabs for 3 lights on top bar and additional mounting locations for aftermarket fog lights in the bumper wings. Most 3 1/2" fog lights or Pods will fit. Fits up to a 30” light bar (may require a U cradle or other mounting bracket to work), two Baja Designs LP9's, or three Baja Design LP6's or similar.

Bolt on application

***Optional Cooler Line Skids: Protects the cooler lines. 5th Gen 4Runner ONLY.

Items Included:

(1) Bare Front Tube Bumper

(1) Aluminum Filler Panel

(1) Frame Mount Set

(2) 12mm x 35mm Bolts

(14) 1.5" Fender Washers

(6) 0.5" Grade 8 Bolts

(6) Lock Washers

(6) 0.5" Nuts

(8) 3/8" Fender Washers

(8) 10mm x 45mm Bolts

Weight: 98 lbs

Built by skilled craftsmen in Colorado Springs, CO USA

Shipping Information:

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping to AK, HI, or outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location and customer is responsible for any additional shipping costs. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Bumpers are built to order. This product will be built in batches and released once completed. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (minor cutting of factory bumper cover)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Fitment Years: 4Runner 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Fitment Years: Tacoma 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 8-10 weeks 

Available now for your 2016 and up Tacoma

***TRD Pro factory skid plate may require modification to work with this bumper. Compatible with most aftermarket skid plates.

Built Hefty tough to be abused, the new Hefty Fabworks Banshee Hybrid bumper for the 2016 and up Tacoma provides the ultimate in strength and functionality. The best part is it's completely modular. With the removal of seven bolts the front aluminum face will come directly off the vehicle leaving a steel substructure underneath. Easy installation process allowing full access to the winch and lighting during installation process. The recessed winch mount accepts most winches up to 10,000lbs with standard 10"x 4.5" mounting pattern. Control box relocation bracket included 

• Steel Skeleton Sub Structure with integrated winch mount with recessed hawse fairlead mount, light bar mount and 1" thick weld through recovery points.

• Aluminum outer shell for corrosion resistance and weight reduction

• Product Weight: 35lbs over stock (Total weight about 55 lbs)

• "No hoop" or "low hoop" options available. Low Hoop is welded on.

• Complete bolt on installation (cutting of the stock bumper required).

• No Powder Coating option available: Unfinished aluminum shell comes DA sanded and pre-prepped for powder coating or customer finish. Steel substructure is raw and will require coating prior to installation.

See how our modular design works:

Note: The Tacoma hoop is weld on.

Built by skilled craftsmen in Colorado Springs, CO USA

For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Certain remote/limited access shipping zones may accrue additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 3 (drilling/cutting of factory bumper)

Installation instructions: 2014+ 4Runner Banshee Bumper Installation Instructions

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

US Patent Pending

Fitment Years: 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 16-20 weeks

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your Tacoma. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. This Premium bumper uses intricate recessed edges and cutouts for that completely unique design but also keeps the factory aesthetics. The recessed winch mount accepts most winches up to 10,00lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line is strongly suggested on all Aluminum bumpers. Available for all models for the 2016+ Tacoma

• Made in 5052 H34 1/4" Aluminum from USA.
• Raw Product Weight: 59lbs
• Recessed lighting holes for aftermarket lights (Surface Mount). Give us a call for different lighting options if the color or beam pattern you'd like is not listed.
• Complete bolt on installation (cutting of the stock bumper required).
• Option for bare aluminum (DA Sanded) and prepped for powder coat or Powder Coated in Semi Gloss Black textured finish

***Different hoop styles may interfere with Toyota Safety Sense (TSS). Please call to confirm compatibility.***

Built by skilled craftsmen in Colorado Springs, CO USA

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 4 (drilling/cutting of bumper)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide.