ALL RACKS SHIP FOR ONE FLAT RATE OF $65 ANYWHERE IN THE LOWER 48.
IN STOCK AND SHIPPING WITHIN 24 HOURS!

Bravo 4Runner 5G Roof Rack (2010-2022)

Adding a rack to your 4Runner is simple and easy with upTOP! Our Bravo series features grooveARMOR technology integrated directly into the side rails. There is pre-machined cut outs and placement points to help allow your customization with items like grab handles or scenePODs. Comes in a sleek stealth black powder coated finish it will look great on your 5G 4Runner! 

This rack is roof top tent compatible and able to use mounts for kayaks, skis, and more. Accepts all current upTOP accessories, mounts, and bracket. 

Specifications

• NO DRILLING REQUIRED
• SUNROOF COMPATIBLE
• WORKS WITH OEM ANTENNA.
• Dimensions: 50" wide X 98.5" long
• Height: Add around 3" to overall vehicle height
• Weight: Less Than 70 lbs.

• (2) Integrated grooveARMOR sides
• (4) ScenePOD ready knock-outs allowing you to decide when and where to add lights to your rack.
• (1) Front Fairing (preferred cutout option)
• (8) Load bars 
• (1) All required fasteners, washers, lock nuts, and spacers are included in the kit.

This full-length aluminum roof rack, for the 2003-2009 Lexus GX470, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 9 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2003-2009 LEXUS GX470
PRODUCT DIMENSIONS: 86.5”X46.5”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X46”
LOAD RATING: 400 LBS. DYNAMIC || 700 LBS. STATIC
NUMBER OF CROSSBARS: 9
OVERALL WEIGHT: ~50 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(9) Crossbars
(6) Mounting Brackets & Rubber Seals
(1) Fairing with Edge Trim
All required hardware for assembly

This full-length aluminum roof rack, for the 2010-2022 5th Gen 4Runner, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 9 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle. 

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2010-2022 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 95”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X 47”
LOAD RATING: 300 LBS. DYNAMIC  ||  700 LBS. STATIC
NUMBER OF CROSSBARS: 9
OVERALL WEIGHT: ~50 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:

(2) Sideplates
(9) Crossbars
(6) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

Lightbar-specific mounting brackets that are designed to position your light bar at the perfect height for the front of your rack. Cut and bent from 3/16” aluminum (Onx6 are 1/4"), these brackets are designed to position your light bar so that the front wind fairing acts as the perfect cutoff line in front of the truck. Eliminating the blinding effects of hood glare.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the black oxide hardware is only for the bolts that go into the crossbar. The bolts that go into the lightbar are stainless steel.

Includes:
(2) Lightbar Brackets
Stainless Replacement Lightbar Hardware (ExtremeLED)
All required hardware for assembly

These handle light brackets are designed for seamless sidelight integration of Baja Designs Rock Lights, right into the handle on your rack system. You no longer have to worry about having your expensive lights ripped off by a stray tree limb or adding any additional holes into the side plate of your rack system.

SOLD IN PAIRS (2)

NOTE: Baja Design Rock Lights do not include a harness.

The heavy duty version of our classic awning mounts, designed for 270-degree awnings. Perfect for Batwing or other similar awnings. Will not work with a rooftop tent.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

SOLD AS A SINGLE, NOT AS A PAIR. 

Designed for all Hi-Lifts and other similar trail jacks, this mount allows for mounting both along the rack and across it. Featuring aluminum knobs for easy removal, this mount is ready for your next trail run.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the main bolt and knob are only available in silver.

Includes:

(2) Hilift Brackets
(2) Aluminum Knobs
All required hardware for attachment to the rack

Tent Risers designed for use with hardshell rooftop tents. Most hardshell tents require an additional mounting bracket to lift them up off of the support bars of the rack system. We believe in keeping tents as low as possible and these mounts are designed to do just that. Select from two different height options to fit your application and tent needs.

*Mounts are sold in sets of 8 brackets.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment and vertical mounting holes to allow for a wide variety of awnings and tent setups.

Designed to work with smaller supported awnings such as Tepui, ARB, Roam, etc.  This bracket will not work with 270-degree awnings- check out our HD Awning Mounts instead!

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Includes:

(2) Awning Mounts
Mounting Hardware for Crossbar Side

A mounting panel that doubles as a platform for your rack. With many different mounting holes, this is ready to mount up whatever you want on your roof. This plate features mounting locations for RotoPax, NMO antennas, various tie-downs, in addition to multiple sliding tracks positioned throughout. These are 12" wide.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

This full-length aluminum roof rack, for the 2005-2022 Double Cab Tacoma, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 7 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2005-2022 TOYOTA TACOMA DOUBLE CAB 
PRODUCT DIMENSIONS: 63”X48-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X48”
LOAD RATING: 400 LBS. DYNAMIC  ||  700 LBS. STATIC
NUMBER OF CROSSBARS: 7
OVERALL WEIGHT: ~45 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(7) Crossbars
(6) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

This full-length aluminum roof rack, for the 2003-2009 4th Gen 4Runner, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 10 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2003-2009 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 89”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X47”
LOAD RATING: 300 LBS. DYNAMIC  ||  600 LBS. STATIC
NUMBER OF CROSSBARS: 10
OVERALL WEIGHT: ~53 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(10) Crossbars
(4) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

This half-length aluminum roof rack, for the 2010-2022 5th Gen 4Runner, takes the adventure-proven full-length rack and makes it smaller for those that need less!  Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware. With a variety of different accessories and mounting options, this rack is modular and makes it easy to secure your gear. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2010-2022 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 63.5”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X 47”
LOAD RATING: 200 LBS. DYNAMIC  ||  500 LBS. STATIC
NUMBER OF CROSSBARS: 5
OVERALL WEIGHT: ~35 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

ALL RACKS SHIP FOR ONE FLAT RATE OF $65 ANYWHERE IN THE LOWER 48.
IN STOCK AND SHIPPING WITHIN 24 HOURS!

Bravo Tacoma Double Cab Roof Rack (2005-2022)

Designed and manufactured for overlanding at a price that is affordable. This is the rack you want for your Tacoma. A user friendly system with machined cut outs and placement points will easily allow you to customize the placement of all of your gear. With a sleek black powder coated finish it will look great on your Tacoma!

Specifications

• WORKS WITH OEM ANTENNA AND SUNROOF.
• NOT COMPATIBLE WITH OEM DESERT AIR INTAKE OR AIRAID SNORKEL
• Dimensions: 50" Wide x 65" Long
• Height: Adds around 2.5" to your vehicle.
• Weight: Around 50 lbs.

• (6) Extruded Aluminum Load Bars. Standard Black.
• (4) Steel Feet that easily mount to OEM Mounting Holes
• (2) Integrated grooveARMOR Sides
• (1) Front Wind Screen (preferred cutout option)
• All required fasteners, washers, lock nuts, and spacers are included in the kit

• Grab Handles, Lighting, ScenePOD, quickWIRE, as well as anything not listed above.