***This item requires cutting and welding***

CNC cut 1/8” thick body mount steel plates (pair) lightly coated in oil. Use these when performing a Body Mount or Cab mount chop for additional tire clearance. Typically this process is required to run most tire sizes over stock on Tacoma, 4-runner and FJ Cruisers.

Currently works on the following vehicles:

2005 to current Toyota Tacoma (2nd and 3rd Generation)

2010+ Toyota 4Runner (5th Generation)

2004 to 2009 Toyota 4Runner (4th Generation)

Toyota FJ Cruiser

Lexus GX470

(may be more to come)

Ground shipping to continental US. Additional shipping costs may be required for shipping to Alaska or Hawaii. Please call before ordering if you are in these locations for accurate shipping quotes.

Fitment Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

***Estimated production lead time is 16-20 weeks

Built Hefty tough to be abused, this bumper can handle the harshest off road terrains and was built with strength and function in mind. Using only the highest grade USA 5052-H34 Aluminum, the 1/4" main body, 3/8" mounting plates, and hardened & sleeved integrated recovery points make this a very strong and very light weight bumper for your 4Runner. Similar in strength as our Steel version at about 1/3rd the weight, it is the perfect choice for overland and everyday use. The light weight Aluminum series bumpers provide the protection you need without the negative effects on your fuel economy and suspension components of a heavy steel bumper. Yes you can run this bumper without suspension modifications. The recessed winch mount accepts most winches up to 9500lbs with standard 10"x4.5" mounting pattern and a non-integrated solenoid. Synthetic winch line strongly suggested on all Aluminum Bumpers. Available for all models and years for the 4th Gen 4Runner.

Built to order, approximately 16-20 week lead time. Call for more accurate lead times. 

Product Specifications

• Made in 5052 H34 1/4" Aluminum from USA.
• Recessed light holes for aftermarket fog lights (non-flush mount).
• Design allows for 20" LED light.
• Complete bolt on installation w/ cutting required.
• Available in raw, unfinished aluminum or Powder Coated in Semi Gloss Black Textured Finish (custom color shown).
• All raw, unfinished aluminum bumpers come DA sanded and pre-prepped for powder coating.

Weight: 59 lbs

Built by skilled craftsmen in Colorado Springs, CO USA.

HeftyFab Installation Rating: 4 (drilling/cutting of bumper required)

Shipping and Pick Up

This bumper ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Bumpers are built to order and require a minimum 16-20 week lead time for production. Production times are an estimate and we do our best to stay within the projected times, however, delays can happen though not common. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide. 

Fitment Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009

Please read full description before ordering.

***Estimated production lead time is 8-10 weeks

Don't pay extra for options that should be standard on your rock sliders! We believe in building rock sliders the right way from the beginning.

New for the 4th gen 4Runner, The Hefty Fabworks rock sliders provide the ultimate in protection and functionality. 100% bolt on. When building our rock sliders we won't compromise on quality, accuracy, or strength. Every set of sliders are built utilizing a CNC cut, bent and fabricated mounting system, all American top quality steel, 2x2 hitch steel main slider with a 1 3/4" x .120 wall DOM tubing rub rail with rear kick out and all assembled using a set jig to eliminate human error. The integrated tread plate feature gives your sliders not only the strength to take on the trail but they function as a convenient entry step. All mounting hardware is provided.

Trimming or removal of the lower rocker trim may be required.

• Features Hefty Fab's "Kick-Out".

• Gusseted legs for additional strength.

• Integrated dimple died tread plate steps for easy vehicle entry.

• 100% Bolt-On installation w/ frame support - no modification required.

• All hardware provided.

• HeftyFab Installation Rating: 2-3 (bolt-on/weight)

Will have similar installation as 5th gen 4Runner:

Built by skilled craftsmen in Colorado Springs, CO USA

This product ships freight only to a business location or can be picked up at a local freight hub. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location. Orders with only a residential address listed will be shipped to the nearest Freight terminal by default. Additional charges may apply prior to shipping.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Rock Sliders are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions! Items for pick up must be picked up within 14 days of notification of product completion or the order will subject to a storage fee unless prior arrangements are made with us.

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

Shipping and Powder Coating: While we attempt to protect our products to the best of our ability for shipping, minor damage, scratches and scuffs can happen and are not covered under warranty. Please see our shipping policy before purchase. If you are adamant about not having any powder coat damage we recommend purchasing the products raw and having them coated locally. Damage is rare and typically minor and can be easily fixed, see our product care guide.

Agency 6™ Recovery Shackle Block Assembly:

• Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)
• Complete Assembly - Includes hitch pin and D-ring shackle. Installs in seconds.
• Made in U.S.A - Limited Lifetime Warranty. Agency 6 Shackle Blocks are designed and manufactured in house with US Certified 6061 T6 CNC machined aluminum.
• Black Powder Coated Shackle Block - Stays looking great thanks to UV and abrasion resistant coating.

Includes:

• Shackle Block
• 3/4" D-Ring Shackle, 4 3/4 ton WLL
• 5/8" Hitch Pin w/ Clip

Pair of knobs to mount your Agency 6 shovel to our mounting devices.

All metal construction will not rust or degrade outdoors.

3/8-16 threads

The Universal Mount Device (UMD) is a billet aluminum universal mounting bracket that can mount on multiple applications such as, round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road equipment in any desired location on flat surfaces, roll bars or other tubing used on the vehicle. 

*Minimum diameter tubing for MMD mounting is 1.5"

Designed to work with Agency 6™ Shovels 

- Material: 6061-T6 Billet Aluminum

- Powder Coat - Stays looking great thanks to UV and abrasion resistant coating

- Made in USA

*Includes: x2 Clamp assemblies - x4 bolts 

The Adventure Mini Shovel 2 is a lightweight multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc.  

Increased length makes for less effort while digging out tires, brush, etc. 

Hand welded construction, made in the USA.

Material: 6061-T6 Aluminum

Weight: 2.5 lbs

Length: 32 inches

Finish: Textured Power Coated

The Agency 6 License Plate Mount attaches to an Agency 6 Fairlead to allow the use of a front plate. Bracket can lift up and down for easy access to winch. This bracket is also spaced to accommodate a variety of front hook or link devices.  Laser cut aluminum ensures this part stays rust free.

Made in the USA.

The SSM (Surface Shovel Mount) is a billet aluminum mounting bracket designed to  mount onto flat applications, such as Roof racks, carrier boxes, and MOLLE panels. Dual mounting angles allow for better clearance when mounting near roof rails or other obstacles. Threaded holes in the rear allow you to mount this directly onto the surface with 1/4-20 hardware (included). Mounting holes are spaced 6" apart.

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- Powder coat Finish
- Stainless mounting hardware included

 
- Made in the USA

Lightbar-specific mounting brackets that are designed to position your light bar at the perfect height for the front of your rack. Cut and bent from 3/16” aluminum (Onx6 are 1/4"), these brackets are designed to position your light bar so that the front wind fairing acts as the perfect cutoff line in front of the truck. Eliminating the blinding effects of hood glare.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the black oxide hardware is only for the bolts that go into the crossbar. The bolts that go into the lightbar are stainless steel.

Includes:
(2) Lightbar Brackets
Stainless Replacement Lightbar Hardware (ExtremeLED)
All required hardware for assembly

These handle light brackets are designed for seamless sidelight integration of Baja Designs Rock Lights, right into the handle on your rack system. You no longer have to worry about having your expensive lights ripped off by a stray tree limb or adding any additional holes into the side plate of your rack system.

SOLD IN PAIRS (2)

NOTE: Baja Design Rock Lights do not include a harness.

The heavy duty version of our classic awning mounts, designed for 270-degree awnings. Perfect for Batwing or other similar awnings. Will not work with a rooftop tent.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

SOLD AS A SINGLE, NOT AS A PAIR. 

Designed for all Hi-Lifts and other similar trail jacks, this mount allows for mounting both along the rack and across it. Featuring aluminum knobs for easy removal, this mount is ready for your next trail run.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Please note, the main bolt and knob are only available in silver.

Includes:

(2) Hilift Brackets
(2) Aluminum Knobs
All required hardware for attachment to the rack

Tent Risers designed for use with hardshell rooftop tents. Most hardshell tents require an additional mounting bracket to lift them up off of the support bars of the rack system. We believe in keeping tents as low as possible and these mounts are designed to do just that. Select from two different height options to fit your application and tent needs.

*Mounts are sold in sets of 8 brackets.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment and vertical mounting holes to allow for a wide variety of awnings and tent setups.

Designed to work with smaller supported awnings such as Tepui, ARB, Roam, etc.  This bracket will not work with 270-degree awnings- check out our HD Awning Mounts instead!

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

Includes:

(2) Awning Mounts
Mounting Hardware for Crossbar Side

The Agency 6 Adventure Mini Shovel / Mount combo is a convenient, complete shovel and mount package. 

The Adventure Mini Shovel (AMS-1) is a lightweight, hand-welded, multi-function outdoor aluminum shovel. Designed for use with off-road/recreation vehicles, traveling, camping, exploring etc. Shovel includes built-in mounting holes (6" apart).

- Material: 6061-T6 Aluminum
- Weight: 1.75 lbs
- Length: 23 inches
- Finish: Power Coated Textured

The UMD (Universal Mount Device) is a billet aluminum universal mounting bracket that can mount on multiple applications, such as round tubing, square bar, and flat surfaces. The UMD is designed to mount most off-road tools or accessories in any desired location on vehicles or equipment.

*Minimum diameter tubing for UMD mounting is 1.5"

- 3/8-16 threaded holes for shovel mounting
- Material: 6061-T6 Billet Aluminum
- BPowder coat Finish

- Made in the USA

*Shovel/Mount Combo includes: x1 Adventure Mini Shovel - x2 UMD - x4 bolts - x2 Shovel Knobs

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.5" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

The Agency 6 Fairlead is made in-house of US 6061-T6 Aluminum and measures 1.0" thick.

This Fairlead features our exclusive mount system which is designed to accommodate camera mounts, light mounts or license plate brackets. 

Includes Stainless Mounting Hardware

Finish: Powdercoat

Agency 6™ Billet Winch Shackle:

Field serviceable winch attachment made from US Certified 6061 T6 CNC machined aluminum with a 17-4 hardened stainless pin.
Lightweight design with a working load limit of 19,000 lbs* capable of standard recovery ops in off road situations.

Integrated cover minimizes abrasion and UV damage to synthetic line.

Stays looking great thanks to UV and abrasion resistant coating.

*Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, shackle, etc)

Finish: Powder Coat
Made in U.S.A. - Limited Lifetime Warranty.

A mounting panel that doubles as a platform for your rack. With many different mounting holes, this is ready to mount up whatever you want on your roof. This plate features mounting locations for RotoPax, NMO antennas, various tie-downs, in addition to multiple sliding tracks positioned throughout. These are 12" wide.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

This full-length aluminum roof rack, for the 2003-2009 4th Gen 4Runner, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware.  Secure your gear by bolting into one of the 10 extrusion crossbars or by strapping it directly to the side plates. This rack is “drill-free” and requires zero modification to your vehicle.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 3-4 WEEKS

THE SPECS

DESIGNED FOR: 2003-2009 TOYOTA 4RUNNER
PRODUCT DIMENSIONS: 89”X47-1/2”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X47”
LOAD RATING: 300 LBS. DYNAMIC  ||  600 LBS. STATIC
NUMBER OF CROSSBARS: 10
OVERALL WEIGHT: ~53 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO SILICONE || NO DRILLING || NO RUST

INCLUDED:
(2) Sideplates
(10) Crossbars
(4) Mounting Brackets
(1) Fairing with Edge Trim
All required hardware for assembly

***Please contact us for availability. 

96504 - Total Chaos Uniball Upper Control Arms

• 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A.
• CNC machined slug adapters press into the spindle and convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
• TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
• Custom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel. The lower hi-misalignment spacer registers into the slug adapter for maximum strength.
• Upper control arms combined with extended length coil over shocks will allow for up to 1" of additional wheel travel.
• Urethane bushings reduce bushing deflection compared to stock rubber bushings.
• Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
• 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
• Complete grade 8 hardware kit is included.
• Fits all 6 wheel lug: '05+ Tacoma, '03+ 4Runner, & '07-14 FJ Cruiser, 03+GX470/GX460

***Please contact us for availability. 

25480 - SPC Adjustable Upper Control Arms for FJ Cruiser, 03-Current 4Runner and 03+ Lexus GX470/GX460

Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC's forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.

• Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC's arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.

• Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.

• Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

• On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

***Free Shipping Applies to the Lower 48 US States***

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone systems on gas tank and transmission skids and additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003 - 2009 4Runner Full Skid Package is the ultimate in underbelly protection for any journey or adventure. Custom CNC cut and formed to cover all your vulnerable components while keeping high clearance approach angles, all while looking sleek and adding a custom look to the front and bottom of your 4Runner.

• Protects all cross-members and key components vulnerable to damage.

• Service openings and vented slots allow for easy maintenance and efficient airflow to critical components.

• Full length backbone reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 92 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA Sanded for finish application.

Package includes: Radiator/Engine, Transmission, and Transfer Case. Gas tank skid is optional. Full set reduces the shipping cost of individual skids.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Full length backbone system on gas tank skid. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 4Runner Fuel Tank Skid is the ultimate tank protection for any journey. Custom CNC cut and fit to cover the entire gas tank while keeping high clearance approach angles. All while looking sleek and adding a custom look to the bottom of your 4Runner.

• Protects entire fuel tank without interference of driveshaft .

• Slotted openings to allow for water and debris drainage.

• Reinforced boxed design allows for a maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 30 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 4Runner Transfer Case Skid is the ultimate T-Case protection for any journey. Custom CNC cut and fit to cover your Transfer Case while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full Transfer Case & Actuator Motor protection with vented slots for crossover pipe exhaust heat dissipation.

• Reinforced box design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 10 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar.***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. Now featuring a full length backbone system. Skids are designed to support the full weight of the vehicle. 

The Hefty Fabworks 2003-2009 4Runner Transmission Skid is the ultimate Transmission protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the belly of your 4Runner.

• Full underbelly protection w/ vented side slots for heat dissipation for catalytic converters.

• Protects 2 belly cross-members and transmission.

• Service openings for easy service without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in a raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 20 lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.

***Current photos showing 5th gen 4Runner but 4th gen are similar. Does not have front access panel***

***Estimated production lead time is 8-10 weeks

Newly redesigned for ultimate strength. These skids have been reinforced unlike anything else on the market. New additional support on front skid. Works with or without differential drop. Skids are designed to support the full weight of the vehicle. 

What makes these better than the competition?

The Hefty Fabworks 2003-2009 4Runner Radiator/Engine Skid is the ultimate front end protection for any journey. Custom CNC cut and fit to cover vulnerable components while keeping high clearance approach angles. All while looking sleek and adding a custom look to the front end of your 4Runner.

• Protects front cross-members, front differential, & oil pan.

• Service openings for easy service and oil changes without complete skid removal.

• Reinforced design allows for maximum strength while maintaining optimal clearance.

• Sides of the skids are nearly double the height of the competition skid plates for greater bending resistance.

• Fully welded and gusseted seams.

• Designed to support the full weight of the vehicle.

• Rear slotted holes allowing for an easy slide and bolt on installation in minutes.

• All hardware provided.

• Direct bolt on, no modifications

• Works on both V6 and V8 4Runners.

• Product comes in raw mill grade aluminum. Machining and grinding marks will be visible. Lightly DA sanded for finish application.

Product Specifications:
Material: 5052 1/4" Aluminum Alloy
Weight: Aluminum - 25lbs
Finish: Raw Unfinished, Mill Grade, Lightly DA sanded for finish application.

Built by skilled craftsmen in Colorado Springs, CO USA

Individual skid plate orders ship ground to residential and business addresses. On all shipments an adult signature is required. For shipping outside the continental USA please call for a shipping quote prior to order. Shipping costs may vary depending on location.

***For all Canada/International orders please read our Frequently Asked Questions PRIOR TO ORDERING***

All Hefty Fabworks Skids are built to order and require a 8-10 week lead time for production. Pick-Up and In-Shop Installation is available. Please call for more details. Pick up during normal operating business hours only, no exceptions!

HeftyFab Installation Rating: 1 (Direct Bolt On)

Refunds and Cancellations: All Hefty Fabworks Products are built to order. Once you place an order there are NO Cancellations or refunds. All Sales are Final.

Order Changes: There will be an additional fee added should order be changed once products are in production. That amount will be determined based on change.